Industrial Duty Rotary Encoder with Single Channel or Quadrature Output - Can be Converted to Industrial Length Sensor

ZB SERIES Rotary Encoder

Industrial Duty Rotary Encoder, Length Sensor

페이지 하단에서 가격을 확인하세요.

가격 확인

Single Channel or Quadrature Output Models
Current Sinking, 250 mA Maximum
4.75 to 28 Vdc Supply Voltage
Up to 1000 PPR for High Resolution Precision Counting or Speed Measurement
6000 RPM Shaft Speed
Conversion Bracket for Length Sensor Measurement

설명

AU-ZBG10002 encoders with the length sensor conversion kits are used for precise speed control in Omega's manufacturing process for metal sheath thermocouple wire.

The ZB Series shaft encoders are general duty industrial rotary pulse generators. The AU-ZBG models are for single channel sensing for counting, one directional measuring or speed applications. The AU-ZBH models are for quadrature applications, allowing for counting up and down along with speed and direction measurements. A conversion bracket is available to easily convert this encoder into a length measuring sensor. They can be direct-coupled to a machine shaft by means of a flexible-bellows, spring, or rubber sleeve type coupling that allows for axial and radial misalignment. They can also be coupled with light instrument timing-belts. Timing-belt drives also allow convenient gear-up or geardown speed ratio changes that can be useful for obtaining non-standard PPR rates.

Specifications
Supply Voltage: 4.75 to 28 Vdc
Output: Current sinking, 250 mA maximum current per output
Maximum Frequency: 1000 ppr, 20 KHz
Connections: 6-pin MS style connector (male) (MIL-C-5015)

See SPECS above for full specifications and additional information on length sensor conversion kit.

가격 확인(원하는 수량을 기입하십시오.)

제품 번호/Desc.

수량

설명

AU-ZBG01002

판매 상담

배송:

Single channel shaft encoder, 100 ppr

AU-ZBG10002

판매 상담

배송:

Single channel shaft encoder, 1000 ppr

AU-ZBH01002

판매 상담

배송:

Quadrature encoder shaft encoder, 100 ppr

AU-ZBH10002

판매 상담

배송:

Quadrature encoder shaft encoder, 1000 ppr

22 AWG shielded cables, 4-conductor with drain

CCARPG01

판매 상담

배송:

10 foot cable with 6-pin MS connector

CCARPG25

157,530원

배송: 2 주

25 foot cable with 6-pin MS connector

CCARPG50

185,260원

배송: 2 주

50 foot cable with 6-pin MS connector

Flexible Shaft Couplings

AU-RPGFC002

판매 상담

배송:

Shaft diameter 0.250 - 0.375", 28mm long & 20mm diameter

AU-RPGFC003

95,120원

배송: 2 주

Shaft diameter 0.375 - 0.375", 28mm long & 20mm diameter

AU-RPGFC004

판매 상담

배송:

Shaft diameter 0.375 - 0.500", 40mm long & 32mm diameter

AU-RPGFC005

판매 상담

배송:

Shaft diameter 0.375 - 6mm, 22mm long & 16mm diameter

Accessories

AU-LSCB1000

판매 상담

배송:

Length sensor conversion bracket

AU-LSAHC001

판매 상담

배송:

Hing clamp assembly for length sensor conversion bracket

AU-WF1000F

판매 상담

배송:

1 foot circumfrence urethane measuring wheel

AU-WF1000K

85,030원

배송: 2 주

1 foot circumfrence knurled measuring wheel

AU-WM0400F

판매 상담

배송:

4/10th meter circumfrence urethane measuring wheel

AU-WM0400K

판매 상담

배송:

4/10th meter circumfrence knurled measuring wheel

† 모든 가격은 원화로 표시되어 있습니다.
참고: Note: NPN Transistor outputs have 1.5 KÙ load resistors returned to supply for internal feed back purposes. This does not interfere with the ability to use these outputs as conventional “Open-Collector” outputs as long as the supply voltage for the ZB is supplied by the indicator or control receiving its output signal. The ZB’s internal load resistor also allows the output to be used as a current source, however, load current must be limited to 1 mA maximum