장바구니  |  연락하기  |  도움  | 
1588 8983  | 
전화번호: 1588 8983
계좌번호:하나은행 201-910031-70804

STANDARD TERMINAL BLOCK RELAYS

XRU1D Series

STANDARD TERMINAL BLOCK RELAYS | XRU1D Series

STANDARD TERMINAL BLOCK RELAYS

68,760원 XRU1D24

CE
  • Pluggable Relay Allows for Field Replacement
  • Functional Plug-In Bridges
  • Screw Connections
  • LED Status Indication
  • DIN Rail Mount
  • Only 6.2 mm (0.24") Wide
  • All Common Input Voltages Between 24 Vdc to 120 Vac
  • NEMA 6 (IP67) Protection
  • Environmentally Friendly, Cadmium-Free Contact
  • Easy, Cost-Effective and Replacement Using Engagement Lever
릴레이 / 타이머 - 관련 제품 보기

설명

Application Description
Used in automation systems, electromechanical relays guarantee a safe connection between process I/O and electronic controls. The following functions are covered by relay coupling elements:
• Electrical isolation between the input and output circuits
• Independence of the type of switching current (AC and DC)
• High short-term overload resistance in the event of short circuits or voltage peaks
• Low switching losses
• Ease of operation

Accessories
Power Terminal Block
The XRAPLCESK power terminal block has the same shape as the relay modules and is used to feed in the bridging potentials. The nominal current is 32 A. When the total current is less than or equal to 6 A, supply can take place directly at the connecting terminal blocks of one of the connected relays.

End Cover
The XRAATPBK end cover is required at the start and stop of a relay strip. It can also be used for visual separation of groups of relays as well as separating relays with voltages greater than 250V and separating neighboring bridges with different potentials. It is equipped with pre-scored break out points at the bridging positions so that individual bridges can be passed through as needed. It may also be necessary to use the end cover between adjacent relays when three phases (L1, L2, L3) are used on the contact side of the relay.

Bridges
The XRAFBST colored, insulated plugin bridge system reduces wiring time by up to 70% compared to conventionally wired relays. The XRAFBST2, 2-position bridges, are suited for bridging a smaller number of relays and total currents <6 A. When a circuit is supplied from both sides, the circuit can be opened at any point, allowing all other modules to continue being supplied at the same time. The XRAFBST500 allow up to 80 modules to be bridged at one time. If bridges with different potentials meet in neighboring modules, the end cover XRAATPBK should be used. All bridges are equipped with a groove for removal with a standard screwdriver.

SPECIFICATIONS
Input Voltage:
   XRU1D24: 24 Vdc
   XRU1D24U: 24 Vac/Vdc
   XRU1D120U: 120 Vac/110 Vdc
Typical Input Current:
   XRU1D24: 9 mA
   XRU1D24U: 11 mA (24 Vac), 8.5 mA (24 Vdc)
   XRU1D120U: 3.5 mA (120 Vac), 3 mA (110 Vdc)
Connection Type: Screw connection
Rigid Solid AWG (mm2): 26 to 14 (0.14 to 2.5)
Flexible Stranded AWG (mm2): 26 to 14 (0.14 to 2.5)
Typical Response Time:
   XRU1D24: 5 mS
   XRU1D24U and XRU1D120U: 6 mS
Typical Release Time:
   XRU1D24: 8 mS
   XRU1D24U and XRU1D120U: 15 mS
Input Protection:
   XRU1D24: Polarity protection diode, free-wheeling diode
   XRU1D24U and XRU1D120U: Bridge rectifier
Contact Type: SPDT
Contact Material: AgSnO
Max Switching Voltage: 250 Vac/Vdc1
Min Switching Voltage: 12 Vac/Vdc
Limiting Continuous Current: 6 A
Min Switching Current: 10 mA
Min Switching Power: 120 mW
Ambient Temp Range: -20 to 60°C (-4 to 140°F)
Rated Operating Mode: 100% operating factor
Inflammability Class: V0, in accordance with UL 94
Mechanical Service Life: 2 x 107 cycles
*The separating plate, XRAPLCESK, should be installed for voltages greater than 250V (L1, L2, L3) between identical terminal points of adjacent modules. Potential bridging is then possible with the XRAFBST bridge system.
가격 확인(원하는 수량을 기입하십시오.)

다른 고객님이 함께 구매하신 제품 : 이 아이콘을 클릭하시면 기존 고객들께서 이 제품을 주문할 때 함께 구매하신 제품리스트가 보입니다.

제품 번호/Desc.
수량
설명
Click to expand/minimize a list of what others bought with theXRU1D120U
XRU1D120U
63,950원
배송: 2 주
 
SPDT relay, 120 Vac/110 Vdc coil voltage
Click to expand/minimize a list of what others bought with theXRU1D24
XRU1D24
68,760원
배송: 2 주
 
SPDT relay, 24 Vdc coil coltage
  
XRU1D24U
79,780원
배송: 2 주
 
SPDT relay, 24 Vac/Vdc coil voltage
REPLACEMENT RELAYS AND ACCESSORIES
  
XRR1D120U
38,460원
배송: 2 주
 
Replacement relay for XRU1D120U
  
XRR1D24
24,900원
배송: 2 주
 
Replacement relay for XRU1D24 and XRU1D24U
  
XRAPLCESK
60,100원
배송: 2 주
 
Power terminal block
  
XRAATPBK
5,110원
배송: 9 주
 
Black end cover
  
XRAFBST2RD
3,500원
배송: 9 주
 
2-position red snap in jumper
  
XRAFBST2BU
3,500원
배송: 9 주
 
2-position blue snap in jumper
  
XRAFBST2GY
3,500원
배송: 9 주
 
2-position gray snap in jumper
  
XRAFBST500RD
53,530원
배송: 9 주
 
80-position red snap in jumper
  
XRAFBST500BU
53,530원
배송: 9 주
 
80-position blue snap in jumper
  
XRAFBST500GY
53,530원
배송: 9 주
 
80-position gray snap in jumper
  
XBMZB6
1,550원
배송: 9 주
 
6.2 mm white blank marker strip
Click to expand/minimize a list of what others bought with theXBANS3575P
XBANS3575P
29,310원
배송: 2 주
 
DIN rail, 35mm x 7.5mm x 2m, slotted
  
XBANS3575U
판매 상담  
배송: 
 
 
DIN rail, 35mm x 7.5mm x 2m, solid
Click to expand/minimize a list of what others bought with theXBANS3515P
XBANS3515P
판매 상담  
배송: 
 
 
DIN rail, 35mm x 15mm x 2m, slotted
  
XBANS3515U
53,720원
배송: 2 주
 
DIN rail, 35mm x 15mm x 2m, solid
  
XBANS3575PL
48,130원
배송: 2 주
 
DIN rail, 35mm x 7.5mm x 2m, slotted, aluminum
모든 가격은 원화로 표시되어 있습니다.
주문 예: (1) XRU1D120U SPDT relay, 120 Vac/110 Vdc coil voltage, 63,950원
We noticed you are from the US. Visit your local site for regional offers and live support.