장바구니  |  연락하기  |  도움  | 
1588 8983  | 
전화번호: 1588 8983
계좌번호:하나 은행 455-910025-42804

Linear Pattern Karma Strain Gages

SGK-L Series

Linear Pattern Strain Gages | SGK-L Series

Linear Pattern Strain Gages

64,260원 SGK-L1E-K350T-PC11-E

  • K-Series, Premium Karma Strain Gages
  • Stock Delivery
  • Plated Solder Pads for Easy Wiring
  • Stock Delivery with Solder Pads
  • Good Linearity Over Wide Temperature Range -75 to 200°C (-100 to 392°F)
  • Good Fatigue Life
  • Custom Gages Available

설명

The linear pattern Karma strain gages are used to measure strain in a single direction. The strain gage pattern is shown on the left side of the table. Notice the "arrow" which indicates the principal stress direction.

The linear pattern strain gages are available in a variety of styles and sizes. OMEGADYNE® offers miniature linear patterns for strain measurement of a stress concentration or high gradient areas. The terminations are offered both at one end of the grid, or with one at each end of the grid. Wide or narrow linear grid patterns are available. Karma gages are supplied with plated solder pads for easy wiring.

To determine if the strain gages have temperature characteristics matched to steel or aluminum, see (on the Spec sheet) the column labeled "COMP" short for compensation, "ST" indicates steel, "AL" indicates aluminum. See the column labeled "BTP" for accessory bondable terminal pad model numbers.

Dimensions are listed for pattern gage grid length (A) and width (B), and the matrix or carrier length (C) and width (D). The patterns include alignment triangles and letter codes indicating creep code.
가격 확인(원하는 수량을 기입하십시오.)
제품 번호/Desc.
수량
설명
SOLD IN PACKAGES OF 5 GAGES
Miniature and Small Linear Patterns
SGK-L1D-K350P-PC11-E
80,330원
배송: 5 주
 
Miniature linear pattern, 350 ohms, compensated for steel
SGK-L1D-K350P-PC23-E
80,330원
배송: 5 주
 
Miniature linear pattern, 350 ohms, compensated for aluminum
SGK-L1E-K350T-PC11-E
64,260원
배송: 5 주
 
Miniature wide linear pattern, 350 ohms, compensated for steel
SGK-L1E-K350T-PC23-E
64,260원
배송: 5 주
 
Miniature wide linear pattern, 350 ohms, compensated for aluminum
SGK-L3A-K350U-PC11-E
64,260원
배송: 6 주
 
Small linear pattern, 350 ohms, compensated for steel
SGK-L3A-K350U-PC23-E
64,260원
배송: 5 주
 
Small linear pattern, 350 ohms, compensated for aluminum
SGK-L3B-K350S-PC11-E
64,260원
배송: 5 주
 
Small linear pattern, 350 ohms, compensated for steel
SGK-L3B-K350S-PC23-E
64,260원
배송: 5 주
 
Small linear pattern, 350 ohms, compensated for aluminum
Linear Patern with Terminal at Each End
SGK-L3C-K350T-PC11-E
64,260원
배송: 5 주
 
Linear pattern with terminal at each end, 350 ohms, compensated for steel
SGK-L3C-K350T-PC23-E
64,260원
배송: 5 주
 
Linear pattern with terminal at each end, 350 ohms, compensated for aluminum
SGK-L3D-K350P-PC11-E
64,260원
배송: 5 주
 
Linear pattern with terminal at each end, 350 ohms, compensated for steel
SGK-L3D-K350P-PC23-E
64,260원
배송: 5 주
 
Linear pattern with terminal at each end, 350 ohms, compensated for aluminum
Medium and Large Linear Patterns
SGK-L3E-K350W-PC11-E
64,260원
배송: 5 주
 
Medium Linear pattern, 350 ohms, compensated for steel
SGK-L3E-K350W-PC23-E
64,260원
배송: 5 주
 
Medium Linear pattern, 350 ohms, compensated for aluminum
SGK-L6A-K350U-PC11-E
106,420원
배송: 5 주
 
Large Linear pattern, 350 ohms, compensated for steel
SGK-L6A-K350U-PC23-E
106,420원
배송: 2 주
 
Large Linear pattern, 350 ohms, compensated for aluminum
SGK-L6A-K1000U-PC11-E
118,460원
배송: 5 주
 
Large Linear pattern, 1000 ohms, compensated for steel
SGK-L6A-K1000U-PC23-E
118,460원
배송: 5 주
 
Large Linear pattern, 1000 ohms, compensated for aluminum
SGK-L6B-K350U-PC11-E
118,460원
배송: 5 주
 
Large Linear pattern, 350 ohms, compensated for steel
SGK-L6B-K350U-PC23-E
118,460원
배송: 5 주
 
Large Linear pattern, 350 ohms, compensated for aluminum
SGK-L6B-K1000U-PC11-E
118,460원
배송: 5 주
 
Large Linear pattern, 350 ohms, compensated for steel
SGK-L6B-K1000U-PC23-E
118,460원
배송: 5 주
 
Large Linear pattern, 1000 ohms, compensated for aluminum
모든 가격은 원화로 표시되어 있습니다.
주문 예: (1) SGK-L1D-K350P-PC11-E Miniature linear pattern, 350 ohms, compensated for steel, 80,330원
We noticed you are from the US. Visit your local site for regional offers and live support.