장바구니  |  연락하기  |  도움  | 
1588 8983  | 
전화번호: 1588 8983
계좌번호:하나은행 201-910031-70804

Parallel Pneumatic Grippers - Low Profile

RPL Series Parallel Gripper

pneumatic parallel grippers | RPL Series Parallel Gripper

pneumatic parallel grippers

735,380원 RPL-1M

  • Precision Gripping-Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
  • Gripper Force 116 to 160 N (26 to 36 lbs) Stroke 6.4 to 19.1 mm (0.25 to 0.75")
  • Accuracy of 0.05 mm (0.002") and Repeatability of 0.03 mm (0.001")
  • Rigid and Low Friction Design Allows for Longer Finger Lengths for Use on Delicate Parts
  • Non-Synchronous Motion Option Provides Independent Jaw Operation
  • Up to 5 Million Cycles in Typical Operation and 10 Million with Maintenance
  • Operating Temperature -35 to 80°C (-30 to 180°F)
  • System Requires 0.3 to 7 bar (5 to 100 psi) Dry Filtered (40 Micron or Better) Air Supply
  • Requires 4 Way, 2 Position Valve and Regulator for Delicate Parts
모션 - 관련 제품 보기

설명



RPL Series Gripper is a pneumatic parallel gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws are front mounted and are supported with 'Dual-V" roller bearings to provide low friction motion and are preloaded for maximum support and zero side play. This gripper supports longer finger length designs compared to other grippers of similar sizes. These grippers are available in stroke lengths from 6.4 to 19.1mm (0.25 to 0.75") with a grip force from 116 to 160 N (26 to 36 lbs).

Linear motion pneumatic components are double acting cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device. Position sensors can easily be added to motion components to detect the end of travel positions of the slides, they are the standard method of communication with the PLC and are available in inductive or magneto resistive sensing styles and come in both PNP or NPN sourcing signals.

TECHNICAL SPECIFICATIONS
Pneumatic Specifications
    Pressure Operating Range: 0.3 to 7 bar(5 to 100 psi)
    Cylinder Type: Dual double acting
    Dynamic Seals: Internally lubricated Buna-N
    Valve Required to Operate: 4-way, 2-position
Air Quality Requirements
    Air Filtration: 40 micron or better
    Air Lubrication: Not necessary*
    Air Humidity: Low moisture content (dry)
Temperature Operating Range
    Buna-N Seals (Standard): -35 to 80°C(-30 to 180°F)
    FKMSeals (Optional): -30 to 120°C(-20 to 250°F)
Maintenance Specifications
Expected Life:
    Normal Application: 5 million cycles
    With Preventative Maintenance: 10+ million cycles*
Field Repairable: Yes
Seal Repair Kits Available: Yes *Addition of lubrication will greatly increase service life.
가격 확인(원하는 수량을 기입하십시오.)

다른 고객님이 함께 구매하신 제품 : 이 아이콘을 클릭하시면 기존 고객들께서 이 제품을 주문할 때 함께 구매하신 제품리스트가 보입니다.

제품 번호/Desc.
수량
설명
  
RPL-1M
735,380원
배송: 14 주
 
Parallel Gripper with a stroke length of 6.4mm (.025') and a grip force of 116 N (26 lb)
  
RPL-2M
1,013,090원
배송: 14 주
 
Parallel Gripper with a stroke length of 12.7mm (0.50') and a grip force of 116 N (26 lb)
  
RPL-3M
1,439,090원
배송: 2 주
 
Parallel Gripper with a stroke length of 19.1mm (0.75') and a grip force of 160 N (36 lb)
Accessories
Click to expand/minimize a list of what others bought with theOSMK-008
OSMK-008
69,570원
배송: 11 주
 
Sensor mounting kit, 1 required
Click to expand/minimize a list of what others bought with theOHSN-017
OHSN-017
241,010원
배송: 2 주
 
NPN magneto resistive sensor short barrel with quick disconnect fitting, 1 or 2 required
Click to expand/minimize a list of what others bought with theOHSP-017
OHSP-017
359,410원
배송: 2 주
 
PNP magneto resistive sensor short barrel with quick disconnect fitting, 1 or 2 required
Click to expand/minimize a list of what others bought with theCABL-010
CABL-010
82,660원
배송: 2 주
 
2 m (6') sensor extension cable with quick disconnect fitting, 1 or 2 required
  
CABL-013
142,950원
배송: 14 주
 
5 m (16') sensor extension cable with quick disconnect fitting, 1 or 2 required
  
OFSV-004
177,810원
배송: 14 주
 
M5 fail safe valve, 1 required
모든 가격은 원화로 표시되어 있습니다.
참고: All models come with standard synchronous jaws, if non-synchronous jaws are required consult sales.
All sensors and cables sold sepatately.
주문 예: (1) RPL-2M Mini pneumatic low profile gripper with jaw stoke of 12.7 mm (0.50''), 1,013,090원
We noticed you are from the US. Visit your local site for regional offers and live support.