Sanitary RTD Sensor with Thermowell/ Removable Sensor/ Connection Head For Use in Clean-In-Place (CIP) Processes

PRS-TW-NB9W Series

Sanitary Thermowell/ Removable Sensor/ Connection Head Assemblies for Food, Dairy, Beverage and BioPharmaceutical Applications | PRS-TW-NB9W Series

523,380원 PRS-3-100-A-TW-0250-D1-NB9W

Clean-In-Place Design for Use in Food, Dairy and pharmaceutical Processes
Removable Probe Assembly is Spring Loaded Into Thermowell for Good Thermal Response
Standard Mounting Cap is a 1½" 16AMP Tri-Grip^TM (Tri-Clamp^® Compatible) Design, Other Cap Sizes and Styles are Available
Avalable with 1⁵⁄8, 2½:", 4½", 7½" and 10½" Immersion Lengths Standard
White Polypropylene Screw Cap Connection Head Standard, Stainless Steel and Flip Top Polypropylene Heads Also Available
Wetted Surfaces are 316L Stainless Steel with a Surface Finish of 32 microinches or Better
4-Wire, Pt100 Class A Platinum RTD Sensor (100.00±0.06Ω at 0°C) Standard
Process Measurement Temperature Range: -50 to 200°C (-50 to 392°F)
Compatible with 3-Wire and 2-Wire RTD Instruments & Transmitters

위생 - 관련 제품 보기

설명

This Pt100 RTD sensor is designed for use in sanitary or Clean-In-Place (CIP) applications where the use of a thermowell assembly is preferred over direct immersion sensors. The thermowell includes a 1½", 16AMP cap feature for easy installation using industry standard gaskets and clamps. The spring loaded RTD probe can be removed from the thermowell without exposing the system to ambient conditions for calibration or replacement. This sensor is also supplied with a white polypropylene screw-cap style connection head with 3/4"NPT conduit connection standard, Stainless steel screw-cap heads, and a flip top style white polypropylene head are also available.

Sensor Specifications Include:

316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.

Immersion lengths of 1⁵⁄8, 2½", 4½", 7½, and 10½" are available from stock, with others available.

Sensor Output is a 4-wire, 100 ohm, Class A, Platinum RTD meeting the requirements of IEC 60751.

These sensors can be used with 2-wire or 3-wire systems see information below.

Insulation resistance: 100 megohms minimum at 100 VDC.

Optional stainless steel connection heads available.

Food process hygienic temperature sensors can be used to aid food safety inspection compliance and verification of time temperature control. Combined with a chart recorder model CTXL you can temperature monitor a CCP ( Critical Control Point) or sanitation time and move toward a HACCP (Hazard Analysis Critical Control Point) compliance plan.

These sensors are supplied standard as 4-wire assemblies with two red wires and two white wires. When used in 3-wire applications, cut off one white wire making sure that it will not contact any terminals or metal surfaces (note: twisting the two white wires together will reduce the lead wire resistance on one side of the sensing element by half adversely affecting the accuracy of the reading). When used in 2-wire applications, cut off one white wire and one red wire (note: in 2-wire applications, twisting the two same-colored wires together at the terminals will not adversely affect your sensor accuracy since both wires will be affected by the reduction in resistance).

가격 확인(원하는 수량을 기입하십시오.)

제품 번호/Desc.

수량

설명

PRS-3-100-A-TW-0163-D1-NB9W

480,940원

배송: 8 주

4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 1⁵⁄8" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head

PRS-3-100-A-TW-0250-D1-NB9W

523,380원

배송: 8 주

4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 2½" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head

PRS-3-100-A-TW-0450-D1-NB9W

559,520원

배송: 8 주

4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 4½" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head

PRS-3-100-A-TW-0750-D1-NB9W

635,840원

배송: 8 주

4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 7½" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head

PRS-3-100-A-TW-1050-D1-NB9W

682,080원

배송: 8 주

4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 10½" Immersion Length, with a White Polypropylene Scew-Cap Style Connection Head

제품 번호로 주문하기

제품 번호

수량

제품 번호

수량

† 모든 가격은 원화로 표시되어 있습니다.
참고: Notes: For other cap sizes and styles, for other lengths, or for thermistor or thermocouple versions of this product, please contact Sales.

Options: For a flip top polypropylene head, change "NB9W" in model number to "NB16W" and add $7 to the price, for a large stainless steel screw top head, change to "NB15" and add $37 to the price, for a medium sized stainless steel screw top head, change to "NB13" and add $55 to the price.

주문 예: (1) PRS-3-100-A-TW-0450-D1-NB9W Removable Pt100 RTD Sensor with 1½, 559,520원

제품 번호 생성기

제품 옵션을 선택하세요

	(1)		(2)		(3)		(4)
PRS-3-		-		-TW-		-D1-

옵션 선택:

(1) Nominal Element Resistance 선택하기:
100 : 100 ohm @ 0 C (standard)
1000 : 1 kohm @ 0 C

(2) Accuracy 선택하기:
A : Class A Accuracy

(3) Insertion Length 선택하기:
0163 : 1-5/8" insertion (2-1/2" well stem length)
0250 : 2-1/2" insertion (4" well stem length)
0450 : 4-1/2" insertion (6" well stem length)
0750 : 7-1/2" insertion (9" well stem length)
1050 : 10-1/2" insertion (12" well stem length)

(4) Protection Head 선택하기:
NB9W : White Polypropylene Head with Screw Cap
NB15 : Large Stainless Steel Head
NB13 : Medium Stainless Steel Head
NB16W : White Polypropylene Head with Flip Top

참고: 제품 구성 시 ‘판매 상담’으로 표시되어있는 제품은 영업부와 상담하십시오.

관련 제품:

PRS-TW-M12 Series Sanitary RTD Sensors