Vibration Resistant and Bendable RTD (Pt100) Probes with M12 Connector and Mounting Threads (Fractional Sizes)

PR-26 Series

262,630원 PR-26A-3-100-A-1/4-0600-M12-1

Operating Temperature Range: -50 to 500°C (-58 to 932°F) Sensing End, -50 to 250°C (-58 to 482°F) at Connector
All Welded 316L Stainless Steel Housing and Probe
Available With or Without Mounting Thread (1/4, 3/8 and 1/2 NPT Mounting Threads Available)
1/4" Diameter Standard, 2" Minimum Length
Pt100 Class A Platinum RTD Standard, Pt1000 Platinum RTD Also Available (per IEC60751)
4 Wire Design Works With Any 2, 3 or 4-Wire Measurement System
Integral 4-Pin M12 Connector for Easy Connection
Bendable Probes (After the First 2" of Probe Tip) Using a Minimum Suggested Bend Radius of 2x the Probe Diameter
Vibration Tested to MIL-STD-202G, Method 204D, Test Condition A, 10gs from 10 to 500Hz (6" Long or shorter)

RTD (PT100) 프로브, 소자 & 부속품 - 관련 제품 보기

설명

Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation. A Partial List Of Our M12 Extension Cables is Included in the Ordering Table Below.

Omega's RTD sensors with M12 connections are designed to provide for easy and efficient installation or removal of these sensors for periodic calibration, troubleshooting or replacement. Gone are the days of having to pull extension cables from cable trays in order to calibrate or replace the sensor, now you simply disconnect the sensor from the extension cable saving cost and downtime. The Omega PR-26 RTD is a flexible and robust temperature sensor made with 316L Stainless Steel housings and sheaths for strength and corrosion resistance. The probe stem is made from mineral insulated cable which produces a sensor that can be used to 500°C, and can be bent (except for the first 2 inches of the tip) to fit your application.

These sensors include a 4-pin, M12 A-Coded plug connector for easy assembly to patch cables or extension cables. Unlike other M12 enabled sensors that have a maximum rating of 85 or 90°C on their connections, the PR-26 RTD can really take the heat with a connector rating of 250°C. Combine this sensor with one of our proprietary M12CM-T24SSPC high temperature extension cables and you have a probe/cable combination that is unmatched in the industry.

For use in thermowells, the PR-26SL Spring-Loaded version of this sensor is the preferred solution. The PR-26SL design includes a non-threaded PR-26A style probe with a self-gripping spring and 1/2NPT threaded fitting to insure that the probe will contact the bottom of the thermowell bore without damaging the sensor. This insures that the sensor length will always be a perfect fit for your thermowell. See the PR-26SL page for additional information.

The mounting thread options on the PR-26 Series sensors allow them to be used in a wide variety of applications, including:

Stand alone immersion sensors.

Installed directly into your product or process using an existing metric threaded port.

When combined with our M12-Handle, non-threaded "A" style PR-26 probes can be used in hand-held sensing applications.

Other applications using a variety of available compression fittings or other accessories.

These RTD sensors can be used in any 2, 3 or 4-wire application by selecting one of the two available wiring arrangements (see the wiring diagrams below) and using only those wires needed for your measurement connection. This allows for simplified, trouble free installation with any existing application. This also allows the PR-26 series sensor to be used for a wide variety of replacement applications since it can be connected as-is with just about any measurement or control equipment available when combined with a 4-pin female M12 connector extension or patch cable.

Standard Mounting Threads: 1/2NPT, 3/8NPT, 1/4NPT and Non-Threaded

Standard Probe Diameters: 1/4" and 1/8"

Standard Probe Length: 6" (2" length mimimum)

Sensor: Pt100 (100 Ohms at 0°C, .00385 TCR (alpha)) Standard, Pt1000 and Other Options Available

Accuracy: Class A Standard (per IEC 60751), Others Available Upon Request

Temperature Range: -50 to 500°C Except for the Connector Which is 250°C Max

Insulation Resistance: 100 Megohms Minimum at 100VDC at Room Ambient

Response Time: Appoximately 8.5 Seconds (63.2% Response) When Immersed in Water Flowing at 3 feet/sec

Vibration Resistance: 10g's from 10 to 500Hz per MIL-STD-202G, Method 204D, Test Condition A (6" long or shorter)

가격 확인(원하는 수량을 기입하십시오.)

다른 고객님이 함께 구매하신 제품 : 이 아이콘을 클릭하시면 기존 고객들께서 이 제품을 주문할 때 함께 구매하신 제품리스트가 보입니다.

제품 번호/Desc.

수량

설명

PR-26A-3-100-A-1/4-0600-M12-1

262,630원

배송: 2 주

Element Pt100, Class A, Length (inch)6.00, Mounting Thread None

PR-26A-3-100-A-1/4-1200-M12-1

282,280원

배송: 6 주

Element Pt100, Class A, Length (inch)12.00, Mounting Thread None

PR-26B-3-100-A-1/4-0600-M12-1

265,190원

배송: 6 주

Element Pt100, Class A, Length (inch) 6.00, Length (inch)1⁄2 NPT

PR-26B-3-100-A-1/4-1200-M12-1

275,710원

배송: 2 주

Element Pt100, Class A, Length (inch) 12.00, Length (inch)1⁄2 NPT

PR-26C-3-100-A-1/4-0600-M12-1

265,190원

배송: 6 주

Element Pt100, Class A, Length (inch) 6.00, Length (inch) 3⁄8 NPT

PR-26C-3-100-A-1/4-1200-M12-1

276,840원

배송: 2 주

Element Pt100, Class A, Length (inch) 12.00, Length (inch) 3⁄8 NPT

PR-26D-3-100-A-1/4-0600-M12-1

262,630원

배송: 6 주

Element Pt100, Class A, Length (inch) 6.00, Length (inch) 1⁄4 NPT

PR-26D-3-100-A-1/4-1200-M12-1

268,470원

배송: 6 주

Element Pt100, Class A, Length (inch) 12.00, Length (inch) 1⁄4 NPT

PR-26B-3-1000-A-1/4-0600-M12-1

257,170원

배송: 6 주

Element Pt1000, Class A, Length (inch) 6.00, Length (inch) 1⁄2 NPT

M12 Extension Cables

M12CM-T24SSPC-SF-2

101,420원

배송: 2 주

2 Meter Long, LCP Overmolded Straight Connector with 4-Conductor FEP Cable (200°C Max)

M12CM-T24SSPC-SF-5

130,630원

배송: 2 주

5 Meter Long, LCP Overmolded Straight Connector with 4-Conductor FEP Cable (200°C Max)

M12CM-T24SSPC-SF-15

204,640원

배송: 7 주

15 Meter Long, LCP Overmolded Straight Connector with 4-Conductor FEP Cable (200°C Max)

M12CM-T24SSPC-RF-5

121,930원

배송: 3 주

5 Meter Long, LCP Overmolded Right Angled Connector with 4-Conductor FEP Cable (200°C Max)

M12CM-T24SSPC-RF-15

211,020원

배송: 7 주

15 Meter Long, LCP Overmolded Right Angled Connector with 4-Conductor FEP Cable (200°C Max)

M12C-PVC-4-S-F-5

33,320원

배송: 2 주

PVC Extension Cable, 5 Meters Long with Straight Female M12 Connector One End

M12C-PUR-4-S-F-5

37,850원

배송: 2 주

Polyurethane Extension Cable, 5 Meters Long with Straight Female M12 Connector One End

M12C-SIL-4-S-F-3

28,470원

배송: 2 주

Silicone Extension Cable, 3 Meters Long with Straight Female M12 Connector One End

M12C-SIL-4-S-F-5

37,330원

배송: 2 주

Silicone Extension Cable, 5 Meters Long with Straight Female M12 Connector One End

Accessories

TX-M12-RTD-C

판매 상담

배송:

Miniature Programmable Temperature Transmitter (4 to 20mA) with M12 Connections (Wiring Option 2 Probes)

TX-M12-RTD-C-1

판매 상담

배송:

Miniature Programmable Temperature Transmitter (4 to 20mA) with M12 Connections (Wiring Option 1 Probes)

TX-M12-RTD-V

판매 상담

배송:

Miniature Programmable Temperature Transmitter (0 to 10VDC) with M12 Connections (Wiring Option 2 Probes)

TX-M12-RTD-V-1

판매 상담

배송:

Miniature Programmable Temperature Transmitter (0 to 10VDC) with M12 Connections (Wiring Option 1 Probes)

M12TX-Pt100

188,940원

배송: 2 주

Over Molded Programmable Temperature Transmitter with 4 to 20mA output and M12 Connections (for use with wiring option 2 probes only)

SPRTX-SS1-M12-1

307,790원

배송: 7 주

4-20 milliamp Transmitter in Mating M12 Connector with Extension Cable, Range -99 to 208°C (-146 to 406F°F) for use with -1 style RTDs

TX94A-1-SS-M12F-1

판매 상담

배송:

4-20mA Transmitter in SST Housing, Range -40 to 49°C (-40 to 120°F) for use with -1 style RTD wiring

TX94A-3-SS-M12F-1

판매 상담

배송:

4-20mA Transmitter in SST Housing, Range -18 to 149°C (0 to 300°F) for use with -1 style RTD wiring

TX94A-4-SS-M12F-1

판매 상담

배송:

4-20mA Transmitter in SST Housing, Range -18 to 260°C (0 to 500°F) for use with -1 style RTD wiring

M12-HANDLE-A

154,420원

배송: 5 주

Handle Accessory to Modify a PR-26A into a Hand-Held Probe

† 모든 가격은 원화로 표시되어 있습니다.
참고: For lengths other than 6", change “0600” in model number to required length and add $1 per inch or 25mm to the price. greater than 6" (example: 9" = 0900, 41/2" = 0450).
주문 예: (1) PR-26A-3-100-A-1/4-0600-M12-1 Element Pt100, Class A, Length (inch)6.00, Mounting Thread None, 262,630원

제품 번호 생성기

제품 옵션을 선택하세요

	(1)		(2)		(3)		(4)		(5)			(6)
PR-26		-3-		-		-		-		-M12	-

옵션 선택:

(1) Mounting Thread 선택하기:
A : None
B : 1/2 NPT
C : 3/8 NPT
D : 1/4 NPT

(2) Element 선택하기:
100 : Pt100
1000 : Pt1000

(3) Accuracy 선택하기:
A : Class A
B : Class B

(4) Sheath Diameter 선택하기:
1/4 : 1/4" Diameter
1/8 : 1/8" Diameter

(5) Length (Custom lengths available) 선택하기:
0600 : 6 Inch
1200 : 12 Inch

(6) Wiring Option 선택하기:
1 : Wiring Option 1
2 : Wiring Option 2

참고: 제품 구성 시 ‘판매 상담’으로 표시되어있는 제품은 영업부와 상담하십시오.