Precision Thermistor Sensor for High-Humidity Environments - Discontinued

ON-940 Series

Precision Thermistor Sensor for High-Humidity Environments

페이지 하단에서 가격을 확인하세요.

가격 확인

Small Size Results in Fast Response Time
Thermistor Sensor and Wires are Epoxied into a Molded Housing
Can Be Installed Into a Large Selection of Housings for Special Applications
Available with Resistances of 2252 Ohms, 3000 Ohms, 5000 Ohms, 10,000 Ohms and 30,000 Ohms at 25°C
Standard Accuracy is ±0.2°C between 0 to 70°C, Optional Accuracy of ±0.1°C between 0 to 70°C is Available
Maximum Temperature: 100°C
Available with 12" (305mm) Long PFA Insulated Lead Wires

써미스터 소자, 프로브 & 부속품 - 관련 제품 보기

설명

Starting from Jan 25 2018, ON-940 series Precision Thermistor Sensor for High-Humidity Environments will be discontinued. Please see the TH-44000 Series series as a possible alternative or contact our Temperature Engineering department.

This sensor is specifically designed for high reliability, high volume and low cost applications where fast response times and small physical size are important considerations. This sensor can be easily utilized by inserting it into an existing hole for mounting.

가격 확인(원하는 수량을 기입하십시오.)

제품 번호/Desc.

수량

설명

ON-940-44004

판매 상담

배송:

2252 Ohms at 25°C, ±0.2°C Accuracy Between 0 to 70°C, and Molded Tip with 12" of PFA Insulated Lead Wire

ON-940-44005

판매 상담

배송:

3000 Ohms at 25°C, ±0.2°C Accuracy Between 0 to 70°C, and Molded Tip with 12" of PFA Insulated Lead Wire

ON-940-44007

판매 상담

배송:

5000 Ohms at 25°C, ±0.2°C Accuracy Between 0 to 70°C, and Molded Tip with 12" of PFA Insulated Lead Wire

ON-940-44006

판매 상담

배송:

10,000 Ohms at 25°C, ±0.2°C Accuracy Between 0 to 70°C, and Molded Tip with 12" of PFA Insulated Lead Wire

ON-940-44008

판매 상담

배송:

30,000 Ohms at 25°C, ±0.2°C Accuracy Between 0 to 70°C, and Molded Tip with 12" of PFA Insulated Lead Wire

† 모든 가격은 원화로 표시되어 있습니다.
참고: For additional cable length, add required length (in inches) to the end of the Model Number. For a phone plug connector, add "-PP" to the Model Number.