Programmable DC Speed Control with Closed Loop Feedback and Digital LED Display for DC Motors Rated to 2 HP

OMDC-MD DC Speed Control

Programmable Digital DC Speed Control

1,500,220원 OMDC-MD10P

가격 확인

Adjustable Min/Max Speed
Adjustable Accel/Decel
NEMA 4X (IP66) Rating
Universal Power Supply, 85-265 Vac
Programmable Power-On Initial Settings
Jog Function Selectable from Many Input Options
Non-Volatile Memory Allows All Custom Settings to Be Stored for Future Use
Program Display for Any Engineering Unit
Speed Feedback Required (Encoder)

구동 / 전동기 - 관련 제품 보기

설명

OMDC-MD10P controllers are used with linear encoders for precise speed control in Omega's manufacturing process for metal sheath thermocouple wire.

Sample Application: Synchronized conveyor controller with jog switch, the slave conveyor 2 will follow changes in speed made to the master conveyor 1. The jog switch allows positioning of conveyor 2 when system is stopped.

The OMDC-MD Series is a compact, programmable DC speed control with digital closed loop feedback and LED display for DC motors rated to 2 horsepower. An on-board microprocessor with non-volatile memory, coupled with sophisticated internal software, makes the OMDC-MD series speed control the ultimate value in accuracy and control. Programmable parameters include maximum and minimum set speed, decimal points, and operating mode (master or follower).

The OMDC-MD series speed control is simple to operate: set the desired RPM, rate, or time in the large 1/2" LED display by depressing the “Up” and “Down” pushbuttons on the front panel. Settings can be one digit at a time or fast sweep. The OMDC-MD series speed control settings are exact and repeatable. It will precisely control speed to ±1/2 RPM of set speed, long term. No calibrations of the control are necessary.

The OMDC-MD speed control is available in both 1/8 DIN and 1/4 DIN industry standard cutout dimensions, providing easy panel installation. These DC motor controllers can be set to RPM, FPM, GRP, process time, or any other engineering unit for easy operation.

SPECIFICATIONS
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: 85 to 265 Vac
Input Frequency: 50/60 Hz
Overload Capacity: 200% for 1 min
Speed Signal Input: 0-5 to 0-24 Vdc, 50K Pulses/Minute (833 Hz)
On-Board Power Supply: 5 Vdc, 50 mA
Faceplate Dimensions:
    OMDC-MD10P: 115 W x 58 H x 117 mm D (4.539 x 2.289 x 4.625")
    OMDC-MD3P: 115 W x 106 H x 117 mm D (4.54 x 4.18 x 4.625")

NOTE:   Speed feedback is required (encoder). Recommended:   OMDC-PU-40E (see below).

가격 확인(원하는 수량을 기입하십시오.)

제품 번호/Desc.

수량

설명

120 VAC Input: 0-90 VDC Output 240 VAC Input: 0-180 VDC Output

OMDC-MD10P

1,500,220원

배송: 6 주

1/8 DIN panel mount, 5A, 0.5 HP at 90 VDC, 1 HP at 180 VDC

OMDC-MD3P

1,752,740원

배송: 6 주

1/4 DIN panel mount, 10A, 1 HP at 90 VDC, 2 HP at 180 VDC

OMDC-MD3P-1

1,869,580원

배송: 6 주

1/4 DIN, 10A, 1 HP at 90 VDC, 2 HP at 180 VDC, provision for remote pushbutton

Optional Sensor

OMDC-PU-20E

401,380원

배송: 2 주

Shaft mounted pick-up sensor, 10 pulses per revolution

OMDC-PU-40E

379,490원

배송: 6 주

Shaft mounted pick-up sensor, 20 pulses per revolution

† 모든 가격은 원화로 표시되어 있습니다.
참고: Comes complete with operator’s manual.
주문 예: (1) OMDC-MD10P Digital closed loop DC speed control for max 1 HP motor with 5 Arm Amps, 1,500,220원 plus (1) OMDC-PU-40E Shaft mounted pick-up sensor with 20 pulses per revolution, 379,490원, 1,500,220 + 379,490 = 1,879,710원

관련 제품: