Kapton® (Polyimide Film) Heater Kit

KH-KIT-EFH-15001

Kapton Flexible Heater Kit

페이지 하단에서 가격을 확인하세요.

가격 확인

Withstands Temperature Extremes from -200 to 200ºC (-328 to 392ºF)
Excellent Tensile Strength and Tear Resistance
Low Out-Gassing
Wattage of 2.5, 5, or 10 W/in
Small, Flexible Radius (0.032" Minimum)
Chemically Resistant to Many Solvents and Oils
Comes with Pressure Sensitive Adhesive Backing
115 or 230 Vac
Multiple Wattage Heaters and Profiled Watts

히터 & 밸브 - 관련 제품 보기

설명

The KH-KIT series has been discontinued. Please see the KHA-KIT-SERIES as a possible alternative or contact our {your dept.} Engineering department.

Wire Gage(AWG)	Max Current(A)
CURRENT RATING TABLE Recommended Leads:
28	1.25
26	1.25
24	3.16
22	5
20	10
18	15
16	15
14	20
A PTFE-insulated lead wire is recommended for energizing the heater. Use heater wattage chart along with current rating table to determine the recommended lead-wire gage.

The Polymide Film heater kit contains thin and flexible heaters with adhesive backing to conform to practically any flat or curved surface. With 15 different shapes, this kit can suit almost any application. Heater configurations are outlined on a 0.3 x 0.3 m (1 x 1') sheet, with line markings for easy selection and cutout. When used in combination, these heaters can provide a number of resistances and wattages. Leads can be soldered on or connected with alligator clips.

SPECIFICATIONS
Thickness: 0.203 mm (0.008")
Maximum Operating Temperature:
    Polymide Film 200°C (392°F)
    Adhesive Backing(Continuous Use): 149°C (300ºF)
    Adhesive Backing (Short Time Periods): Up to 232°C (450°F)
Dielectric Strength: 1000 Vac min

Size (in)	Resistance(Ω)	Watts (12V)	Amps	Watts (28V)	Amps	Watts (115V)	Amps	Watts (230V)	Amps
0.5 x 2.0	8.8	16.4	1.4	89.1	3.2	1502.8	13.1	6011.4	26.1
0.75 x 2.5	23.5	6.1	0.5	33.4	1.2	562.8	4.9	2251.1	9.8
0.75 x 3.25	33.2	4.3	0.4	23.6	0.8	398.3	3.5	1593.4	6.9
1.0 x 1.0	11	13.1	1.1	71.3	2.5	1202.3	10.5	4809.1	20.9
1.0 x 3.0	40	3.6	0.3	19.6	0.7	330.6	2.9	1322.5	5.8
1.0 x 6.0	105.9	1.4	0.1	7.4	0.3	124.9	1.1	499.5	2.2
1.5 Dia.	32.8	4.4	0.4	23.9	0.9	403.2	3.5	1612.8	7
1.5 x 4.5	120.3	1.2	0.1	6.5	0.2	109.9	1	439.7	1.9
1.5 x 8.0	252	0.6	0	3.1	0.1	52.5	0.5	209.9	0.9
2.0 Dia.	56.4	2.6	0.2	13.9	0.5	234.5	2	937.9	4.1
2.0 x 3.0	103.7	1.4	0.1	7.6	0.3	127.5	1.1	510.1	2.2
2.5 x 1.25	42.8	3.4	0.3	18.3	0.7	309	2.7	1236	5.4
2.5 x 2.5	108.6	1.3	0.1	7.2	0.3	121.8	1.1	487.1	2.1
3.0 Dia.	169	0.9	0.1	4.6	0.2	78.3	0.7	313	1.4
3.0 x 3.0	153.7	0.9	0.1	5.1	0.2	86	0.7	344.2	1.5