장바구니  |  연락하기  |  도움  | 
1588 8983  | 
전화번호: 1588 8983
계좌번호:하나은행 201-910031-70804

Industrial Plastic Pipe Clamp HANI Temperature Sensor

HTS-HANI-CLAMP-P

Industrial Plastic Pipe Clamp HANI Temperature Sensor | HTS-HANI-CLAMP-P

Industrial Plastic Pipe Clamp HANI Temperature Sensor

1,061,850원 HANI-C-1.0I-P-MA

  • Non-invasive temperature measurement
  • Installation in seconds, no tools required
  • Clamps to outside of pipe, measures fluid inside of pipe
  • Accuracy comparable to an invasive sensor, ±1.5°C
Hybrid Temperature Sensors - 관련 제품 보기

설명

Ease of Installation


Install your HANI™ Clamp Sensor in seconds


Omega’s innovative clamp-on design makes sensor installation easy. Unlike invasive sensors, the HANI™ Clamp Sensor mounts to the outside of an industrial plastic pipe and measures the temperature of the process media inside the pipe.

  • • No drilling
  • • No cutting
  • • No downtime


Need to relocate the sensor? Un-clamp and go!


High Accuracy & Fast Response Times


Performs like an invasive sensor.


Omega’s patent pending Hybrid Temperature Sensing platform uses multiple sensors and a proprietary algorithm to achieve steady state accuracy comparable to invasive sensors and faster response times than surface sensors.

• Accuracy for industrial plastic pipes: ±1.5°C


Industrial pipes have a wide variety of tolerances, surface finishes, and coatings which can affect the accuracy. An in-situation user calibration can be done to improve the accuracy for your specific application. Use the free Omega Sync software to do a 1 or 2-point calibration with the HANI™ Clamp Sensor and an in-place immersion sensor. See the user manual for additional details.


Non-Invasive & Non-Contact Operation


No penetration, no risk of contamination


The HANI™ Clamp Sensor never comes into contact with the process media flowing through the pipe. There is no risk of buildup, sensor wear or breakage from high flow rates, corrosive/abrasive liquids, wake frequency and water hammer.

 


Ensure you select the right sensor for your system


Industrial pipes have different outer and inner diameters, make sure you pick the correct sensor for your application.

 

 

 

weigh3-uf

weigh3-uf

Pipe Type OD (Outer Diameter) ID (Inner Diameter) Wall Thickness Schedule
1.0” Industrial Pipe 1.315” 1.049” 0.133” 40
2.0” Industrial Pipe 2.375” 2.067” 0.154” 40
1.0” Industrial Pipe 1.315” 0.957” 0.179” 80
2.0” Industrial Pipe 2.375” 1.939” 0.218” 80


Common Applications


New and retrofitting existing systems

Lower the total cost of ownership and reduce contamination risk without sacrificing performance by upgrading to a HANI™ Clamp Sensor.


Quality control & ad-hoc sensing

Clamp-on the sensor in seconds and connect to your laptop or PC for readings anytime - anywhere.


Verify existing invasive sensors

With accuracies comparable to most state-of-the-art invasive sensors, the HANI™ Clamp Sensor can easily be placed next to an invasive sensor to verify the accuracy or determine the drift of the invasive sensor.

가격 확인(원하는 수량을 기입하십시오.)

다른 고객님이 함께 구매하신 제품 : 이 아이콘을 클릭하시면 기존 고객들께서 이 제품을 주문할 때 함께 구매하신 제품리스트가 보입니다.

제품 번호/Desc.
수량
설명
  
HANI-C-1.0I-P-MA
1,061,850원
배송: 2 주
 
0 to 100°C, 4-20 mA, 1.0" Industrial Plastic Pipe
  
HANI-C-2.0I-P-MA
1,061,850원
배송: 2 주
 
0 to 100°C, 4-20 mA, 2.0" Industrial Plastic Pipe
  
HANI-C-1.0I-P-MA-CAL-3
1,316,700원
배송: 8 주
 
0 to 100°C, 4-20 mA, 1.0" Industrial Plastic Pipe, Cal Cert
  
HANI-C-2.0I-P-MA-CAL-3
1,316,700원
배송: 8 주
 
0 to 100°C, 4-20 mA, 2.0" Industrial Plastic Pipe, Cal Cert
Accessories
  
IF-001
105,990원
배송: 2 주
 
Omega Link Smart Probe USB Interface, 2m cable
Click to expand/minimize a list of what others bought with theM12.8-S-F-FM
M12.8-S-F-FM
68,500원
배송: 2 주
 
8 pin female M12 field mountable connector, straight
모든 가격은 원화로 표시되어 있습니다.

제품 메뉴얼:

다운로드 Manual #1
다운로드 Manual #2
We noticed you are from the US. Visit your local site for regional offers and live support.