장바구니  |  연락하기  |  도움  | 
1588 8983  | 
전화번호: 1588 8983
계좌번호:하나 은행 455-910025-42804

[단종]Clamp-on Power Meter

HHM98P

단종 - Voltage meter, Volt meter | HHM98P

단종 - Voltage meter, Volt meter

페이지 하단에서 가격을 확인하세요.

1 year warranty
  • Harmonic Measurement: Up to 25 PF for 3 Ø 4 W, 3 Ø 3 W, 1 Ø 2 W, 1 Ø 3 W
  • Easy-to-Read Triple Display: kW, V, A
  • Measurements Recorded for Each Wire: V, A, kW, kVA, kVAR, PF, Hz, Total 24 Parameters
  • AC Current Up to 1000 A, AC Voltage Up to 600 V
  • Inrush (100 ms), Hold, and Peak Functions
  • Max/Min/Avg Functions
  • Balanced Load Function
  • Dimensions of Conductor: 46.5 Ø mm
  • Auto Power-Off after 10 Minutes of Non-Use

설명


HHM98P시리즈는 단종되었습니다.
문의 사항이 있으시면, 영업 담당자에게 문의하여 주십시오.



The HHM98P multifunction clamp-on meter provides high accuracy and reliability in a low-cost, portable package. The built-in AC clamp makes this meter ideal for troubleshooting electric resistance heaters and other plant electrical systems. In addition, the HHM98P effectively measures current from 3 to 1000 A.

Specifications
Display: 4-digit LCD with a maximum reading of 9999
Overrange: (OL) or (-OL) is displayed
Low-Battery Indicator: The "" is displayed
Measurement Rate: 1/s, nominal
Operating Temperature: 0 to 40°C (32 to 104°F) @ <70% RH
Storage Temperature: -20 to 60°C (-4 to 140°F) 0 to 80% RH with battery removed from meter
Accuracy: 23 ±5°C @ 75% RH
Temperature Coefficient: 10% of applicable accuracy per °C (5% per °F) outside the range of 18 to 28°C (65 to 82°F)
Altitude: Up to 2000 m
Dimensions of Conductor: 46.5 Ø mm
Power: Standard 9 V battery (included), NEDA 1604, JIS 006P, IEC 6F22
Battery Life: 50 hr typical with carbon-zinc
Dimensions: 250 H x 100 W x 46 mm D (9.8 x 3.9 x 1.8")
Weight: Approx. 375 g (0.8 lb) with battery
AC CURRENT (True RMS)
Range: 0 to 1000 A
Resolution: 0.1/1 A
Accuracy:
±(1.5% rdg + 10 digits) on 50 to 60 Hz;
±(6% rdg + 10 digits) on 45 to 400 Hz
AC VOLTAGE (True RMS)

Range: 0 to 600 V
Resolution: 0.1 V
Accuracy:
±(1% rdg + 5 digits) on 20 to 100 Hz;
±(6% rdg + 5 digits) on 100 to 400 Hz
Input Impedance: 1 M.
Power Measurement Accuracy: Single-phase or balance three phase load with sine wave input; power factor = 1, 50/60 Hz
Effective Measurement Range:
    Current: 3 to 1000 A
    Voltage: 80 to 600 V
Active Power (kW):
    Range: 0 to 600 kW
    Resolution: 0.01/0.1 kW
    Accuracy: ±(3.0% rdg + 10 digits) reactive power, apparent power and power factor values obtained by calculation from active power, current and voltage measurements
Measurement Accuracy: ±2 digits with respect to calculation from each measured value

Apparent Power (kVA):
    Range: 0 to 60 kVA
    Resolution: 0.01/0.1 kVA
Reactive Power (kVAR):
    Range: 0 to 60 kVAR
    Resolution: 0.01/0.1 kVAR
Power Factor (PF):
    Range: 0 to 1
    Resolution: 0.001
Frequency:
    Range: 20 to 400 Hz
    Resolution: 0.1 Hz
Accuracy: ±(0.5% rdg + 5 digits)
Sensitivity:
   Voltage: 5 Vrms
    Current:
    5 Arms on 20 to 100 Hz;
    10 Arms on 100 to 400 Hz
Harmonic Measurement (Effective in the Voltage and Current):
    Measurement Items: Level of each order, percentage of each order and total harmonic distortion (THD-F and THD-R)
    Measurement Range: Fundamental frequency, 45 to 65 Hz
Window Width: 1 cycle (45 to 65 Hz)
Date Points: 128 points
Window Type: Rectangular
Orders Analyzed: Up to 25th
Order Accuracy:
    1 ±(3.0% rdg + 10 digits)
    2 to 6 ±(3.5% rdg + 10 digits)
    7 to 8 ±(4.5% rdg + 10 digits)
    9 to 10 ±(5.0% rdg + 10 digits)
    11 to 15 ±(7.0% rdg + 10 digits)
    16 to 20 ±(10% rdg + 10 digits)
    21 to 25 not specified
Harmonic Percentage: ±2 digits with respect to calculation from each measured value
Total Harmonic Distortion Ratio: ±2 digits with respect to calculation from each measured value
모든 가격은 원화로 표시되어 있습니다.
We noticed you are from the US. Visit your local site for regional offers and live support.