Hi-Density Miniature Cartridge Heaters with 321 SS Sheath ⅛" (3.175 mm) Nominal Diameter

HDC19100 Series 1/8

Hi-Density Miniature Cartridge Heaters, SS, 1/8

86,570원 HDC19100

Watt Densities of 60 W/in² to 175 W/in² Provide Maximum Process Temperature Flexibility
Standard 321 Stainless Steel Sheath Material Provides High Temperature Strength, Good Thermal Conductivity and Resistance to Corrosion and Scaling
Swaged Construction Provides Excellent Heat Transfer and High Dielectric Strength
U.L. Component Recognized
CSA Certified
Applications up to 565°C (1050°F) Working Temperature
Maximum Sheath Temperature 650°C (1200°F)*
Standard Lengths - 31.8 to 101.6 mm (1.25 to 4")
120V and 240V Models
Five Termination Styles and Two Mounting Options

^{*Incoloy^® 800 Sheath Material Available on Special Order for Applications up to 760°C (1400°F).}

카트리지 히터 - 관련 제품 보기

설명

Hi-Density Multi-Purpose cartridge heaters represent Omega's commitment to value-added customer service. Omega maintains over 65,000 semi-finished hi-density cartridge heater substrates in stock, offering a combination of over 1000 sizes in industry standard diameters and lengths ranging from 25.4 to 1524 mm (1" to 60") (depending on diameter) in a complete spectrum of wattages and operating voltages.

Multi-purpose cartridge heaters are the solution for a multitude of original equipment manufacturers (OEMs) and maintenance (MRO) applications. Highly engineered standard and special purpose Omega cartridge heaters have been at the forefront of addressing the challenges of Original Equipment Manufacturers (OEMs) in a broad segment of diversified industries. As a company Omega is uniquely qualified and committed to assisting our customers in developing highly engineered specific use cartridge heaters for dependable and reliable performance.

Let Omega provide the optimal solution to your thermal loop systems and cartridge heater design challenges. Omega will custom manufacture to your specifications. Contact us today with your requirements.

Hi-Density Miniature Cartridge Heaters ⅛" Dia., Actual 0.122" ± 0.002" (3.10 mm)

Sheath Length		Model Number		Watts	Watt Density
inch	mm	120V	240V		W/cm²	W/in²
1¼	31.8	HDC19100	—	25	14	90
1¼	31.8	HDC19101	—	35	20	126
1¼	31.8	HDC19102	—	50	28	180
1	38.1	HDC19103	—	30	12	80
1½	38.1	HDC19104	—	60	25	160
2	50.8	HDC19105	—	40	11	70
2	50.8	HDC19106	HDC19112	50	13	87
2	50.8	HDC19107	HDC19113	100	27	175
2½	63.5	HDC19108	—	50	11	68
3	76.2	HDC19109	—	60	10	64
3½	88.9	HDC19110	—	70	10	62
4	101.6	HDC19111	HDC19114	80	9	60

Model Numbers listed are cartridge heaters with Type N Terminations 24 mm (10") leads.
Five terminations & two mounting options are available for 1/8" dia. heaters.
Note: 3.18 mm (⅛") diameter Hi-Density miniature cartridge heaters are made to order only.
Other Watt Densities and heater lengths up to 12" (304.8 mm) may be available on special order.
Standard lead time is 3 weeks.

가격 확인(원하는 수량을 기입하십시오.)

다른 고객님이 함께 구매하신 제품 : 이 아이콘을 클릭하시면 기존 고객들께서 이 제품을 주문할 때 함께 구매하신 제품리스트가 보입니다.

제품 번호/Desc.

수량

설명

HDC02670

판매 상담

배송:

1 inch diameter 120 volt, 1000 watts, 13 inches long

HDC02665

308,780원

배송: 6 주

1 inch diameter 120 volt, 500 watts, 7 7/8 inches long

HDC02666

판매 상담

배송:

1 inch diameter 240 volt, 500 watts, 7 7/8 inches long

HDC00108

78,760원

배송: 2 주

5/16 inch diameter 120 volt, 150 watts, 2 inches long

HDC00111

82,180원

배송: 2 주

5/16 inch diameter 240 volt, 200 watts, 2 1/2 inches long

제품 번호로 주문하기

제품 번호

수량

제품 번호

수량

† 모든 가격은 원화로 표시되어 있습니다.
참고: Ordering Information Order by Model number for stock cartridge heaters with Type N termination. Call Omega for model numbers for heaters with other terminator program terminations and options. Custom Engineered/Manufactured Cartridge heaters can be application specific; therefore for sizes, electrical ratings, terminations and any other design features not listed here Omega will custom manufacture to your specifications. Consult us with your requirements.