Constant Temperature Heated Dry Baths

HDB

페이지 하단에서 가격을 확인하세요.

가격 확인

Uniform Heating for Test Tubes, Cuvettes, and Other Sample Containers
Interchangeable Insert Blocks
Models for 1, 2 or 3 Insert Blocks
Solid State Temperature Control

연구실용 장비 - 관련 제품 보기

설명

OMEGA™ HDB series heated dry baths provide a safe, dry, constant temperature source in the laboratory for the purpose of incubation, boiling, inactivation, wet ashing, enzyme analysis and a variety of clinical and industrial applications.

Interchangeable aluminum insert blocks are sized to accept tubes or containers ranging from 6 mm to 26 mm diameter. A close fit of the tubes in the block ensures high heat transfer to the tube, and the heater design, thermistor temperature sensor and solid state circuitry give exceptionally good temperature stability and uniformity.

Temperature stability is ±0.1°C, and uniformity between blocks is ± 0.2°C (both at 40°C).

Temperatures are adjusted in the HDB-1, HDB-2, and HDB-3 using a dial calibrated in degrees centigrade. On the HDB-3D, the dial and digital display are used to set the temperature. The digital indicator also provides a continuous temperature display.

A block extraction tool, and threaded fitting machined into the block, allow easy block removal. The threaded hole is also used to insert glass thermometers for accurate temperature measurement of the block.

Aluminum Insert Blocks

Model No.	Tube Size	Number of Holes	Size (mm)
6013501	Plain Block	None	95 x 76 x 51
6013502	6 mm	30	95 x 76 x 51
6013503	10 mm	20	95 x 76 x 51
6013504	12 mm	20	95 x 76 x 51
6013505	13 mm	20	95 x 76 x 51
6013506	15 mm	12	95 x 76 x 51
6013507	16 mm	12	95 x 76 x 51
6013508	19 mm	8	95 x 76 x 51
6013509	25 mm	6	95 x 76 x 51
6013510	10 mm cuvettes 2 channels		95 x 76 x 51
6013512*	Plain Block Thermometer	Hole Only	95 x 225 x 51
6014460	Plain Block Thermometer	Hole Only	95 x 76 x 51
6014462	24 mm	6	95 x 76 x 51
6014463	26 mm	6	95 x 76 x 51
6014464	1.5 ml Eppendorf	20	95 x 76 x 51
6014465	0.5 ml Eppendorf	30	95 x 76 x 51
6014466	Plastic Half Plain Blocks**		95 x 37 x 50

*For HDB-3, HDB-3D only
**If less than the maximum number of blocks are used, it is recommended that the plastic half blocks fill the space on either side of the aluminum block(s) in order to maintain temperature stability

가격 확인(원하는 수량을 기입하십시오.)

제품 번호/Desc.

수량

설명

Heated Dry Baths

HDB-2

판매 상담

배송:

Heated dry bath, 2 blocks, 25°C to 105°C, 450 W, 120V

HDB-3

판매 상담

배송:

Heated dry bath, 3 blocks, 25°C to 200°C 650 W, 120V

HDB-3D

판매 상담

배송:

Heated dry bath, 3 blocks, 25°C to 200°C 650 W, 120V, temperature and setpoint display

Aluminum Insert Blocks

6013501

362,340원

배송: 16 주

0-hole insert block

6013502

판매 상담

배송:

30-hole insert block

6013503

362,340원

배송: 16 주

20-hole insert block

6013504

362,340원

배송: 16 주

20-hole insert block

6013505

362,340원

배송: 16 주

20-hole insert block

6013506

362,340원

배송: 16 주

12-hole insert block

6013507

362,340원

배송: 16 주

12-hole insert block

6013508

362,340원

배송: 16 주

8-hole insert block

6013509

362,340원

배송: 16 주

6-hole insert block

6013510

판매 상담

배송:

Insert block

6013512

968,890원

배송: 16 주

Hole-only insert block

6014460

판매 상담

배송:

Hole-only insert block

6014462

판매 상담

배송:

6-hole insert block

6014463

362,140원

배송: 16 주

6-hole insert block

6014464

판매 상담

배송:

20-hole insert block

6014465

판매 상담

배송:

30-hole insert block

6014466

102,370원

배송: 16 주

Insert block

† 모든 가격은 원화로 표시되어 있습니다.
참고: Comes with block extraction tool, power cord and plug, and operator’s manual. Aluminum insert blocks are ordered separately (see table above).
240 volt models also available. To order add “-240V” suffix to model number.
주문 예: (2) 6013503 20-hole insert blocks, 362,340원0