Turbine Flowmeters for Fuel

FTB380 Series

페이지 하단에서 가격을 확인하세요.

가격 확인

Indicates Both Rate and Total
Up to 1.5% Reading Accuracy
6-Digit Display
Signal Output Capabilities
Reads GPM or LPM (Field Selectable)
Battery Operated (Included)

설명

FTB380 Series turbine meters with microprocessor-based electronics offers a durable, compact, highprecision fuel measurement device, with total and rate indication. Information is clearly displayed on a large 6-digit liquid crystal display with only 2-point floating decimal for totals from 0.01 to 999,999. All operations are easily performed with only 2 buttons.

The basic unit and display are powered by 2 lithium batteries, providing up to 4000 hours of use. Automatic "on" and "off" extend battery life. Manual "on" allows view of the display on demand. Cumulative total, batch total, and rate of flow are standard. A singlepoint field calibration curve can be stored in memory.

The turbine meter can also be ordered without display electronics. A special pulse output module (FLSC790-P-ND) must be ordered to obtain an open collector current sinking output operated on 9 to 35 Vdc. The output is a square wave pulse with a 3-wire connection.

Accessories for Turbine Meters with the Dislay
The FTB790-RK-FM is an FM approved remote kit. It allows the display electronics to be mounted in a hazardous area up to 30 m (100') from the turbine meter and for fluid temperatures of -40 to 121°C (-40 to 250°F).

The FLSC790-BATT is the replacement battery for the display electronics. Batteries provide 4000 hours of use.

The FLSC790-90D is a 90° mounting adaptor designed to allow displays to be mounted 90°from the standard position.

SPECIFICATIONS
Accuracy:
    FTB381: ±5% rdg
    FTB383, FTB385: ±1.5% rdg
Repeatability:
    FTB381: ±1%
    FTB383, FTB385: ±0.2%
Pressure Rating: 300 psig (21 bar)
With Remote Electronics Kit: -40 to 121°C (-40 to 250°F)
Temperature Range (Without Remote Electronics): -10 to 60°C (14 to 140°F)
Viscosity: Rated accuracy for fuels or fluids With viscosity of (1 cSt); meters with display can be used for fluids up to 100 cSt with field calibration
Wetted Components:
    Housing: Aluminum
    Journal Bearings: Ceramic (96% alumina)
    Shaft: Tungsten carbide
    Rotor and Supports: Nylon
    Retaining Rings: 316 SS
Display: 6-digit LCD indicates flow rate, batch and cumulative total
Battery Life: 4000 hours
FM Approvals: Turbine meters with display and no accessories or with the FLSC790-RK-FM are FM approved for Class 1, Div. 1 hazardous environments
Note: Other outputs and accessories are not designed for hazardous environments

가격 확인(원하는 수량을 기입하십시오.)

다른 고객님이 함께 구매하신 제품 : 이 아이콘을 클릭하시면 기존 고객들께서 이 제품을 주문할 때 함께 구매하신 제품리스트가 보입니다.

제품 번호/Desc.

수량

설명

A109GMA025NA1

판매 상담

배송:

Turbine Flowmeters for Fuel

A1XXXXA025NB1

437,770원

배송: 6 주

Turbine Flowmeters for Fuel

A109GMA100NA1

판매 상담

배송:

Turbine Flowmeters for Fuel

A1XXXXA100NB1

443,310원

배송: 2 주

Turbine Flowmeters for Fuel

A109GMA200NA2

판매 상담

배송:

Turbine Flowmeters for Fuel

A1XXXXA200NB2

1,869,020원

배송: 6 주

Turbine Flowmeters for Fuel

Accessories

FLSC790-P-ND

판매 상담

배송:

Pulse output for models without displays "-ND" suffix); open collector output

FLSC790-90D

판매 상담

배송:

90º display mounting adaptor

† 모든 가격은 원화로 표시되어 있습니다.
참고: Comes complete with two 3V lithium batteries (already installed) and operator's manual.
Note: Other outputs and accessories are not designed for hazardous environments.
For 5-point NIST traceable certification, add suffix "-NIST" to the model number (extra charge).