Variable Speed and Fixed Timer Peristaltic Pumps

FPU2000A

Peristaltic Pumps | Variable Speed & Fixed Timer

페이지 하단에서 가격을 확인하세요.

가격 확인

Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection

펌프 및 혼합기 - 관련 제품 보기

설명

Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs and can be adjusted by selecting the pumphead tube size and choosing the desired RPM (revolutions per minute).

Standard Percentage & Digital Percentage Controllers
The FPUVS2000A and FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.

The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA and 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) and digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied and should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.

SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene^®
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30') water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6⅛ x 10⅛ x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6¼ x 10 x 9¼")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (⅜” ID x ¼" OD)

* Only 220 Vac/50 Hz and 230 Vac/60 Hz models are CE approved.

가격 확인(원하는 수량을 기입하십시오.)

제품 번호/Desc.

수량

설명

Fixed-Timer Control

FPU2001A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 6, GPD 2.3, PSI 100, RPM 14

FPU2002A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 13, GPD 4.9, PSI 100, RPM 30

FPU2003A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 21, GPD 8, PSI 100, RPM 45

FPU2004A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 25, GPD 9.5, PSI 75, RPM 60

FPU2005A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 18, GPD 6.8, PSI 100, RPM 14

FPU2006A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 42, GPD 16, PSI 100, RPM 30

FPU2007A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 63, GPD 24, PSI 100, RPM 45

FPU2008A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 79, GPD 30.1, PSI 75, RPM 60

FPU2009A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 57, GPD 21.7, PSI 50, RPM 14

FPU2010A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 138, GPD 52.5, PSI 50, RPM 30

FPU2011A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 200, GPD 76.1, PSI 50, RPM 45

FPU2012A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 250, GPD 95.1, PSI 50, RPM 60

Standard Percentage

FPUVS2001A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 6, GPD 2.3, PSI 100, RPM 14

FPUVS2002A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 13, GPD 4.9, PSI 100, RPM 30

FPUVS2003A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 21, GPD 8, PSI 100, RPM 45

FPUVS2004A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 25, GPD 9.5, PSI 75, RPM 60

FPUVS2005A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 18, GPD 6.8, PSI 100, RPM 14

FPUVS2006A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 42, GPD 16, PSI 100, RPM 30

FPUVS2007A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 63, GPD 24, PSI 100, RPM 45

FPUVS2008A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 79, GPD 30.1, PSI 75, RPM 60

FPUVS2009A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 57, GPD 21.7, PSI 50, RPM 14

FPUVS2010A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 138, GPD 52.5, PSI 50, RPM 30

FPUVS2011A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 200, GPD 76.1, PSI 50, RPM 45

FPUVS2012A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 250, GPD 95.1, PSI 50, RPM 60

Digital Percentage Controllers

FPUDVS2001A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 6, GPD 2.3, PSI 100, RPM 14

FPUDVS2002A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 13, GPD 4.9, PSI 100, RPM 30

FPUDVS2003A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 21, GPD 8, PSI 100, RPM 45

FPUDVS2004A

판매 상담

배송:

Pump Tube OD (inch)¼, mL/min 25, GPD 9.5, PSI 75, RPM 60

FPUDVS2005A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 18, GPD 6.8, PSI 100, RPM 14

FPUDVS2006A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 42, GPD 16, PSI 100, RPM 30

FPUDVS2007A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 63, GPD 24, PSI 100, RPM 45

FPUDVS2008A

판매 상담

배송:

Pump Tube OD (inch)⅜, mL/min 79, GPD 30.1, PSI 75, RPM 60

FPUDVS2009A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 57, GPD 21.7, PSI 50, RPM 14

FPUDVS2010A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 138, GPD 52.5, PSI 50, RPM 30

FPUDVS2011A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 200, GPD 76.1, PSI 50, RPM 45

FPUDVS2012A

판매 상담

배송:

Pump Tube OD (inch)⁷/₁₆, mL/min 250, GPD 95.1, PSI 50, RPM 60

† 모든 가격은 원화로 표시되어 있습니다.
참고: Comes complete with suction tube strainer, tube weight, suction tubing, discharge tubing, and injection fitting with internal back-flow check valve, mounting hardware, and operator’s manual. FPUVS and FPUDVS come with an additional set of brushes.
To order CE approved 220 Vac/50 Hz model, add suffix “-220/50” to model number, no additional charge.
To order CE approved 230 Vac/ 60 Hz model, add suffix “-230/60” to model number, no additional charge.
Note: 220 Vac/50Hz fixed speed models output approximately 20% less.