장바구니  |  연락하기  |  도움  | 
1588 8983  | 
전화번호: 1588 8983
계좌번호:하나 은행 455-910025-42804

DUAL PULSE TIMER

DPT35 Series

Dual Pulse Timer | DPT35 Series

Dual Pulse Timer

745,600원 DPT35

1 year warranty
  • Single or Dual Pulse Timing
  • Easy Set-Up
펌프 및 혼합기 - 관련 제품 보기

설명

The DPT35 digital counter-timer is designed to be used with OMEGA™ (or similar) meters and flow sensors that produce a pulse signal. It is typically used in water treatment and chemical dosing applications, most often in cooling towers and boilers. The DPT35 serves as either a single or a dual timer, depending on whether one or both of its independent accumulators and timers are used. When the DPT35 is used as a single timer, the accumulator counts the pulses coming from the meter. When a pre-set number of pulses has been reached, output power turns on for a set time, and then the cycle repeats. For applications requiring dual timers (typically, one chemical feed and one water bleed), both accumulators and timers are set to operate independently, even though input is from a single meter or flow sensor. A sequential function can be selected to lock one timer out while the other is operating, this prevents feed and bleed from occurring simultaneously.

SPECIFICATIONS
Power: 115 Vac
Sensor Power: 12 Vdc
Output (2): 115 Vac
Enclosure: 127 x 178 mm (5 x 7") polycarbonate
Accumulator Range: 1 to 9999 pulses
Timer Range: 1 to 9999 seconds
Maximum Input: Frequency 1000 Hz
Relay Contact Rating: 5 A resistive @ 115 Vac, or 1/4 HP
Temperature: 0 to 55°C (32 to 130°F)
Weight: 4 lbs (64 oz)
가격 확인(원하는 수량을 기입하십시오.)
제품 번호/Desc.
수량
설명
Quick Ship
DPT35
745,600원
배송: 2 주
 
Dual pulse timer relay output
Quick Ship
DPT35S
893,110원
배송: 6 주
 
Dual pulse timer solid state output
모든 가격은 원화로 표시되어 있습니다.
참고: Comes complete with splash proof cover and operator’s manual.