Ohmmeter Indicator/Controller - Discontinued

DP2000-0/DP9000-0 Series

Ohmmeter Indicator/Controller

페이지 하단에서 가격을 확인하세요.

가격 확인

1999 or 9999 Count Display Span
Ranges from 19.99 ohm to 19.99 kohm (DP2000)
Ranges from 999.9 ohm to 9.999 kohm (DP9000)
Front-panel accessible zero and span adjust
1 mV or 0.1 mV/count Analog Output
LED or LCD Display
Display Hold and Test
Screw-Terminal Barrier Strip
Analog Outputs Available
Proportional Control Available

설명

Starting from Apr 1st 2018, DP2000/9000 Series have been discontinued. As a possible substitute, please check out the DPPT Panel Meter or DP20 Series for details.

The DP2000/9000-O is a panel mount resistance meter with direct readout in ohms. Resistance ranges are jumper selectable. It is complete with current excitation and open resistance detection. With the addition of analog and control outputs, it can be incorporated as a system component in ATE and closed-loop control applications.

Power and Display Options
Six types of power supplies are available: 120 Vac, 240 Vac, 24 Vac, 5 Vdc, isolated 9 to 32 Vdc and isolated 26 to 56 Vdc. An LED display is standard, an LCD display is optional and is recommended for viewing in bright ambient light. A NEMA (IP65) 4 splash-proof lens cover is available.

Signal input and power connections are made via a rear barrier terminal strip. The motherboard rear edge connector provides access to hold and test, polarity, clock, and the standard analog output and optional analog outputs. Decimal point positions can be selected by jumpers.

Analog Output Options
A 1 mV/count (±2 V full-scale) or 0.1 mV/count (±1 V full-scale) analog output is standard and is ideal for driving a strip-chart recorder. An additional analog output can be provided by an optional vertical plugin board. Available output signals are 0 to 5 Vdc, 0 to 10 Vdc, 0 to 1 mA (source or sink) and 4 to 20 mA (source or sink). The top and bottom of each output range can be scaled to fit a user-selected display span.

Control Output Options
Additional outputs can be provided by a horizontal upper board. Available options include single-setpoint control with one 10 A relay, dual-setpoint control with two 10 A relays, 4 to 20 mA proportional control (source or sink), time-proportional 2 A solid-state relay control, and isolated, parallel BCD output.

SPECIFICATIONS
Input Configuration
Connection: 2- or 4-wire
Zero Adjustment: ±50 counts
Overvoltage Protection (Differential): 15 Vp
Open-Circuit Voltage (maximum): 12V
Conversion
Technique: Dual slope, average value
Signal Integration Period: 100 ms, nominal
Reading Rate: 2.5/s, nominal
Display
LED: Red, 14.2 mm (0.56"), 7-segment
LCD: 12.7 mm (0.50"), 7-segment
Power
AC Models: 120, 240, or 24 Vac 10%/-15%, 49 to 440 Hz
DC Models: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp; 5 Vdc ±5%, non-isolated
Common Mode
Voltage: 1500 Vp test (354 Vp per IEC spacing)
Rejection (DC to 60 Hz): 120 dB
Environmental
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Humidity: 95% RH, non-condensing @ 40°C (104°F)
Mechanical
Bezel: 96 W x 48 H x 8 mm D (3.78 x 1.89 x 0.31")
Depth Behind Bezel: 139.8 mm (5.50")
Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")
Weight: 17 oz (480 g)
Case Material: 94 V-0 UL-rated polycarbonate

가격 확인(원하는 수량을 기입하십시오.)

제품 번호/Desc.

수량

설명

DP2000-O2

판매 상담

배송:

Ohmmeter Indicator/Controller, 3-1/2 digit display, red LED display, 120 Vac power, 1 mV per count analog output, 2- or 4-wire resistance input with 199.9 ohm range (no control output)

DP2001-O1

판매 상담

배송:

Ohmmeter Indicator/Controller, 3-1/2 digit display, red LED display, 120 Vac power, 1 mV per count analog output, dual setpoint 10 A relay, 2- or 4-wire resistance input with 19.99 ohm range

DP2020-O1

판매 상담

배송:

Ohmmeter Indicator/Controller, 3-1/2 digit display, red LED display, 120 Vac power, 0 to 01 Vdc analog output, 2- or 4-wire resistance input with 19.99 ohm range (no control output)

† 모든 가격은 원화로 표시되어 있습니다.
참고: Comes complete with operator’s manual.

제품 번호 생성기

제품 옵션을 선택하세요

	(1)	(2)	(3)	(4)		(5)	(6)
DP					-

옵션 선택:

(1) Display Resolution and Case Style 선택하기:
2 : ±1999 counts (3 1/2 digits)
9 : ±9999 counts (4 digits)

(2) Display & Power Options 선택하기:
0 : LED 120 Vac (49/440 Hz) (BQ20 or BQ90)
1 : LCD 120 Vac (49/440 Hz) (BQ21)
2 : LED 240 Vac (49/440 Hz) (BQ22 or BQ92)
3 : LCD 240 Vac (49/440 Hz) (BQ23)
4 : LED 9-32 Vdc (isolated) (BQ24 or BQ94)
5 : LCD 9-32 Vdc (isolated) (BQ25)
6 : LED 5 Vdc** (BQ26 or BQ96)
7 : LCD 5 Vdc** (BQ27)
8 : LED 24 Vac (BQ28 or BQ98)
9 : LCD 24 Vac (BQ29)
A : LED 26-56 Vdc (isolated) (BQ2A or BQ9A)
B : LCD 26-56 Vdc (isolated) (BQ2B)

(3) Analog Outputs 선택하기:
0 : 1mV (DP2) or 0.1mV (DP9) analog output non-isolated. (standard)
1 : 0-5 Vdc non-isolated (BA01)
2 : 0-10 Vdc non-isolated (BA01)
3 : 0-1 mA source or sink non-isolated (BA01)
4 : 4-20 mA source or sink non-isolated (BA01)
5 : 4-20 mA sink (high-compliance) non-isolated. (BA02)
6 : 4-20 mA ISOLATED (BA03)

(4) Control Outputs 선택하기:
0 : None
1 : Dual-setpoint 10 A relay. (BDT1)
2 : Proportional 4-20 mA control source or sink (BDP1)
3 : Time-proportional solid-state 2 A relay plus proportional 4-20 mA control source or sink. (BDP2)
4 : BCD (isolated latched buffered byte addressable). Includes 50-pin mass-termination connector. (BDD2)
5 : Single-setpoint 10 A relay (BDS1)

(5) Input Type and Range 선택하기:
O1 : 2- or 4-wire resistance input 19.99 ohm (BSCR) Not Recommended for DP9000
O2 : 2- or 4-wire resistance input 199.9 ohm (BSCR) Not Recommended for DP9000
O3 : 2- or 4-wire resistance input 1999 ohm (DP2) 999.9 ohm (DP9) (BSCR)
O4 : 2- or 4-wire resistance input 19.99 kohm (DP2) 9.999 kohm (DP9) (BSCR)

(6) Display Color 선택하기:
없음(공란으로 비워두기) : for Red Display (standard)
-G : Green Display

참고: 제품 구성 시 ‘판매 상담’으로 표시되어있는 제품은 영업부와 상담하십시오.