In-Line Amplifiers for Pressure Transducers and Load Cells

DMD Series

450,830원 DMD-19V

가격 확인

NEMA-4, NEMA-12 or Lightning Protected Junction Box Enclosures Available
Rugged Design for Industrial Applications
Models with 0-5 Vdc, Triple Range 0-5 Vdc, or 4-20 mA Outputs

액세서리 - 관련 제품 보기

설명

The DMD Series In-Line Amplifiers convert a mV/V transducer into either a 0-5 Vdc or 4-20 mA output device. They are intended for applications where physical conditions will not allow the amplifier to be integral with the transducer body and must be ordered with a transducer as they are calibrated with that transducer to effect their output over the range of the transducer. The 4-20 mA output amplifiers require a bridge resistance of at least 5000 Ohms.

가격 확인(원하는 수량을 기입하십시오.)

제품 번호/Desc.

수량

설명

DMD-19V

450,830원

배송: 8 주

In-line amplifier with 0-5 volt output and NEMA-4 enclosure

DMD-17V

450,830원

배송: 8 주

In-line amplifier with 0-5 volt output and NEMA-12 enclosure

DMD-19V3

판매 상담

배송:

Triple range amplifier with 0-5 volt output and NEMA-4 enclosure

DMD-19I

판매 상담

배송:

In-line amplifier with 4-20 mA output and NEMA-4 enclosure

DMD-17I

450,830원

배송: 8 주

In-line amplifier with 4-20 mA output and NEMA-12 enclosure

DMD-18I-JB

450,830원

배송: 8 주

Lightning protected junction box with 4-20 mA output and 1/2-14 conduit fittings

† 모든 가격은 원화로 표시되어 있습니다.
참고: 1) Mating connectors ordered separately, PT06F10-6S, $26.50 ea. 2) Current output models require bridge resistance >5000 Ohms
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
주문 예: (1) DMD-19V NEMA-4 style 0-5 Vdc output amplifier with Bendix connectors as the input and output, 450,830원 plus (2) PT06F10-6S Mating input and output connectors, 59,370원0, 450,830 + 59,370 X 2 = 569,570원