Isolated Signal Conditioners with Transducer Power up to 120 mA for Strain Gages, Load Cells and Transducers

DMD-475

1,213,010원 DMD-475

가격 확인

700 V I/O Isolation
1100 V Line Isolation
Power for Four 350 Ohm Load Cells, Fixed 10 V or Variable 5 to 10 Vdc
Adjustable Gain and Offset
Large Tare Offset Adjustment
6 Wire Bridge Connections
Voltage or Current Output Models

액세서리 - 관련 제품 보기

설명

The DMD-470 Series bridge amplifiers are ac powered signal conditioning modules with triple isolated voltage or current outputs for load cells, bridge type sensors and strain gages. Both models have dual zero/tare functions. Zero is used for normal bridge balance and the tare feature allows up to 68% of the input to be offset and still achieve full output span. The DMD-475 has an isolated voltage output; the DMD-476 is similar, but has an isolated 4 to 20 mA output. Both models have input ranges of 5 to 50 mV for a full scale output (0-10 V or 4-20 mA).

SPECIFICATIONS
Common
Power: 115 Vac ±10 Vac standard or 220 Vac ±10% 50/60 Hz optional
Isolation:
AC Line: 1100 Vrms, 60 pF
Input to Output: 700 Vdc and 60 pF
Operating Temperature: -25 to 55°C (-13 to 131°F)
Storage Temperature: -25 to 85°C (-13 to 185°F)
Weight: 510 g (18 oz)
Size: 96 L x 51 W x 73 mm H (3.75 x 2 x 2.87")

Bridge Supply
Voltage Range: 5 to 10 Vdc
Current Output: 120 mA max
Line and Load Regulation: 0.02% max
Output Noise: 1 mVrms max (120 Hz)
Temp Coefficient: 60 ppm @ 10V, 100 ppm max

DMD-475 (Voltage Output)
Gain Range: 200 to 2000
Input Range for 10V Output: 5 to 50 mV
Linearity: ±0.005% FS
Temperature Stability: 0.005%/°C
Tare Adjustment: -3 to 25 mV
Input Resistance: 1000 MΩ
Output Zero Adjust: 0 to 2V
Output Range: -3 to 10 Vdc
Output Current: 5 mA maximum
Dynamic Response: DC to -3 dB = 10 Hz, 2 pole
Response Time: 10 to 90% = 35 ms

DMD-476 (4 to 20 mA Transmitter)
Output: 4 to 20 mA, 0 to 20 mA
Input Range for 16 mA Span: 5 mV min, 50 mV max
Linearity: ±0.01%
Zero Adjust: 0 to ±12 mA
Temperature Stability: 0.005%/°C
Tare Adjustment: -3 to 25 mV equals 80% of 3 mV/V cell
Input Impedance: 1000 MΩ
Common-Mode Rejection: 100 dB
Common-Mode Input Voltage: 5V
Output Zero Adjust: 0 or 4 mA
Output Range: 4 to 20 mA or 0 to 20 mA
Compliance Voltage: -1 to 20V
Dynamic Response: DC to -3 dB = 10 Hz, 2 pole
Response Time: 10 to 90% = 35 ms

가격 확인(원하는 수량을 기입하십시오.)

다른 고객님이 함께 구매하신 제품 : 이 아이콘을 클릭하시면 기존 고객들께서 이 제품을 주문할 때 함께 구매하신 제품리스트가 보입니다.

제품 번호/Desc.

수량

설명

DMD-475

판매 상담

배송:

Isolated voltage output (0 to 10 Vdc) amplifier/signal conditioner module

DMD-475-220V

판매 상담

배송:

Isolated 220 Vac powered DMD-475

DMD-476

판매 상담

배송:

Isolated current output (4 to 20 mA) amplifier/signal conditioner module

DMD-476-220V

판매 상담

배송:

Isolated 220 Vac powered DMD-476

DMD-476-DC

판매 상담

배송:

Isolated current output (4 to 20 mA) amplifier/signal conditioner module, 10-36 Vdc powered

Accerrories

DIN400

판매 상담

배송:

DIN Rail Mounting Kit

POWER CORD-SE

17,430원

배송: 5 주

AC Power cord with stripped end termination

† 모든 가격은 원화로 표시되어 있습니다.
주문 예: (1) DMD-475 Isolated voltage output (0 to 10 Vdc) amplifier/signal conditioner module, 1,213,010원

제품 메뉴얼:

다운로드 DMD-475 - Bridgesensor AC Powered Signal Conditioner

다운로드 DMD-476 - Bridgesensor AC Powered Signal Conditioner

다운로드 DMD-476-DC - DC Powered Signal Conditioner