장바구니  |  연락하기  |  도움  | 
1588 8983  | 
전화번호: 1588 8983
계좌번호:하나 은행 455-910025-42804

DA084 Series

Vent Plug IP55 | DA084 Series

Vent Plug IP55

페이지 하단에서 가격을 확인하세요.

1 year warranty CE
  • High Degree of Protection
  • Easy to Install
  • IP55
전기기기용 케이스(NEMA규격) - 관련 제품 보기

설명

It has become more and more important to provide a protected enclosure environment for valuable and crucial electrical and electronic components. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation. When this occurs, the risk of dust and humidity being absorbed into the control panel increases dramatically. The specially designed pressure compensation plug DA084 permits a controlled change in pressure. It can be installed easily in any enclosure. Because of the pressure compensation plug’s high degree of protection IP55, the protection type of the enclosure will not be affected.

SPECIFICATIONS
Mounting: PG 29 thread with union nut
Material: Plastic according to UL94 V-0
Air Interface: Approx. 7 cm² (2.8 in²)
Dimensions: Ø 66 x 31 mm (2.6 x 1.2")
Fitting Position: Variable
Operating/Storage Temperature: -45 to 70°C (-49 to 158°F)
Installation: Make cut-out Ø 37 + 1 mm (1.5 + 0.03") in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.
가격 확인(원하는 수량을 기입하십시오.)
제품 번호/Desc.
수량
설명
Quick Ship
DA08400901
11,750원
배송: 7 주
 
Vent Plug with gasket
모든 가격은 원화로 표시되어 있습니다.
참고: Comes with operator’s manual.