Temperature Controllers

CN350, CN360, & CN370 Series

Easy to Use Temperature Controllers

페이지 하단에서 가격을 확인하세요.

가격 확인

Economical, Easy to Use
1 /16 DIN Panel Cutout
Input Types; J, K, R, S Thermocouples and 100 .Platinum RTD
Fixed Proportional Band (4%) with Manual Reset
Fixed Cycle Time: 30 s for Mechanical Relay and 3 s for dc Solid State Output
User Convertible for Proportional or On-Off Control

온도 & 공정 컨트롤러 & 파워 스위치 장치 - 관련 제품 보기

설명

The CN350, CN360 and CN370 Series controllers are designed for economical and easy use. Models are available with digital, deviation, or non-indicating display, for J, K, R, and S thermocouples or 100 . platinum RTD input. The small 1.88" (48 mm) square face, 1.77" square cutout ( 1 /16 DIN) and short depth behind panel (3.54", 90 mm) help save panel space and installation costs. All models have a digital thumbwheel for adjusting the setpoint. The CN370 Series models provide continuous digital display of the process temperature. The CN360 Series indicate whether the process temperature is within ±1.5% full scale of the setpoint or above or below setpoint. The CN350 Series are non-indicating. These controllers are time proportional with manual reset, and can be converted to ON-OFF control by changing internal jumpers. The proportional band is fixed at 4%.
Two types of output are available. A 2.5 Amp (SPDT) mechanical relay is for use with systems which can use a 30-second cycle time. With an external solid state relay, loads to 5 Amps can be accommodated. For systems which require a faster cycle time, the dc solid state driver output should be used. This has a cycle time of approximately 3 seconds and can control high ac loads using a dc controlled solid state relay.

가격 확인(원하는 수량을 기입하십시오.)

제품 번호/Desc.

수량

설명

Relay Output Model Controllers

Indicating Controllers

CN371-JF3-24VDC

판매 상담

배송:

Time Proportional Controller, J Input, 0-499 Degree Fahrenheit Range, DC Pulse Output with an Indicating Display. 24 Vdc Power.

Deviation Controllers

CN361-P1F4

판매 상담

배송:

Time Proportional Controller, RTD Input, 0-799 Degree Fahrenheit Range, Mechanical Relay Output with an Deviation Display.

DC PULSE OUTPUT UNITS

Non-Indicating Controllers

CN352-P2CX

판매 상담

배송:

Time Proportional Controller, RTD Input, 0-99.9 Degree Celcius Range, DC Pulse Output, Non-Indicating.

CN352-P1F2

판매 상담

배송:

Time Proportional Controller, RTD Input, 0-399 Degree Farenheit Range, DC Pulse Output, Non-Indicating.

CN352-P1C2

판매 상담

배송:

Time Proportional Controller, RTD Input, 0-399 Degree Celcius Range, DC Pulse Output, Non-Indicating.

CN352-JC2

판매 상담

배송:

Time Proportional Controller, J Input, 0-399 Degree Celcius Range, Mechanical Relay Output with an Non-Indicating Display.

CN352-KC2

판매 상담

배송:

Time Proportional Controller, K Input, 0-399 Degree Celcius Range, Mechanical Relay Output with an Non-Indicating Display.

† 모든 가격은 원화로 표시되어 있습니다.
참고: For low voltage 24 Vdc power, add suffix "-24VDC", no additional charge. Low voltage power is not available on dc Pulse models: CN372, CN362 or CN352 series. Each controller is supplied with user’s manual.

제품 번호 생성기

제품 옵션을 선택하세요

	(1)	(2)		(3)	(4)
CN3			-

옵션 선택:

(1) Display Option 선택하기:
5 : Non-Indicating
6 : Deviation Display
7 : Digital Readout Indication

(2) Output Option 선택하기:
1 : Mechanical Relay
2 : DC Pulse Driver

(3) Sensor Type and Temperature Range 선택하기:
JC2 : J Thermocouple 0 to 399 Degrees C
JF3 : J Thermocouple 0 to 499 Degrees F
JF4 : J Thermocouple 0 to 799 Degrees F
KC2 : K Thermocouple 0 to 399 Degrees C
KC5 : K Thermocouple 0 to 999 Degrees C
KC6 : K Thermocouple 0 to 1199 Degree C
KF5 : K Thermocouple 0 to 999 Degrees F
KF8 : K Thermocouple 0 to 1999 Degree F
RC7 : R Thermocouple 0 to 1699 Degrees C
RF9 : R Thermocouple 0 to 2999 Degrees F
SC7 : S Thermocouple 9 to 1699 Degrees C
P1C1 : 100 Ohm Platinum RTD -99 to 99 Degrees C
P2CX : 100 Ohm Platinum RTD 0 to 99.9 Degrees C
P1C2 : 100 Ohm Platinum RTD 0 to 399 Degrees C
P1F2 : 100 Ohm Platinum RTD 0 to 399 Degrees F
P1F4 : 100 Ohm Platinum RTD 0 to 799 Degrees F

(4) Low Voltage 24 Vdc Power 선택하기:
없음(공란으로 비워두기) : No Option
-24VDC : 24 Volt dc Power Option

참고: 제품 구성 시 ‘판매 상담’으로 표시되어있는 제품은 영업부와 상담하십시오.