1/4 DIN Ramp/Soak Controller - Discontinued

CN2120

1/4 DIN Ramp/Soak Controller

페이지 하단에서 가격을 확인하세요.

가격 확인

200 Segments
90 Independent Programs
9 Linked Programs
11 Logic Inputs and 14 Digital Outputs
Real Time Clock/ Calendar Option
Universal Inputs (TC, RTD, Linear)
Wide Range of Outputs: Relay, dc Pulse, ac SSR, or Analog
Special Control Functions: Output Linearization and Split Outputs
Output Failure Detection
NEMA-4X (IP65) Face Plate

설명

The CN2120 Series has been discontinued. Please see Omega's new CNPT Series as a possible alternative or contact our Temperature Engineering department. Some remaining stock is available as shown below in the "to Order" section.

The OMEGA™ CN2120 Ramp/Soak Controller is a fully functional controller with flexibility to meet many demanding control applications. The controller has many standard and special features that allow precise programming for any profile application.

Program
The 200 segments can be used in up to 90 programs. These programs can be linked together or run separately. For each of the programs, it is possible to:
• Use up to 99 segments
• Set program repetitions
• At the end of program, either turn on an "end of program" digital output, turn off the control outputs, set the control output to a set value, or use the last set point of the program for control.
• Set up to 14 events
• Choose one of 5 PID groups/segment
• Choose one of 10 Wait bands/segment

Real Time Clock Option: Allows for auto start program at specific time and on specific days.

Special Control Features
The CN2120 provides special programming features that will improve the control for some applications. The CN2120 has the capability of splitting the control output between 2 outputs in the "Split Range" feature. Another program feature allows use with quick opening and equal percentage type valves.

Digital Inputs
Three Digital inputs are standard on the CN2120 with options for up to 8 additional inputs. These inputs can be programmed to:
• Select between Run/Hold
• Abort a program
• Select a program
• Auto/manual selection
• Set output limit
• Reset alarm
• Reverse or direct control action

Digital Outputs
Outputs 2, 3 and 4 can be used as digital outputs. In addition, options are available for 5 or 10 additional outputs. These outputs can be programmed as:
• Break event
• Timer event
• End of cycle annunciator
• Program in Run, Hold or Wait State
• Controller in manual or auto state
• Error annunciation

T/C Type	Range °C	Range °F
B PT-30% RH/PT-6% RH	0 to 1820	32 to 3300
C 5% RE-W/ 26% RE-W	0 to 2300	32 to 4170
D W3-RE/W25-RE	0 to 2300	32 to 4170
E CHROMEGA™-CONSTANTAN	-100 to 800	-150 to 1470
G W/W26-RE	0 to 2300	0 to 4170
L J DIN	-100 to 900	-150 to 1650
J IRON-CONSTANTAN	-100 to 1000	-150 to 1830
K CHROMEGA™-ALOMEGA™	-100 to 1370	-150 to 2500
N OMEGA-P, OMEGA-N	-100 to 1400	-150 to 2550
Ni/NiMo PT-13%	0 to 1200	32 to 2190
R PT-13% RH-PT	-50 to 1760	-60 to 3200
S PT/10% RH-PT	-50 to 1760	-60 to 3200
T COPPER-CONSTANTAN	-200 to 400	-330 to 750
U T DIN	-200 to 600	-330 to 1110

Model Number	Description
CN2120-()-()	Ramp/soak profile controller
CN2121-()-()	Ramp/soak profile controller with output failure detection or potentiometer feedback (field selectable)

Outputs 1 and 2 (insert suffix) (Control, Alarm, or Event Assignable)

Suffix	Output 1	Output 2
-R1-R2	Relay	Relay
-T1-T1	ac SSR	ac SSR
-DC1-R2	dc Pulse	Relay
-DC1-DC2	dc Pulse	dc Pulse

Option

Suffix	Output 5	Output 6
-F5-F6	0 to 20, 4 to 20 mA	0 to 20, 4 to 20 mA

Power Supply Option

Suffix	Discription
-LV	24 Vac/Vdc power

Options (only one option available per unit)

Suffix	Discription
-A2	RS-485, aux. power supply
-A4	RS-485, aux. power supply, clock
-A6	RS-485, aux. power supply, 4 logic inputs, 5 digital outputs
-A7	RS-485, aux. power supply, 8 logic inputs, 10 digital outputs
-A8	RS-485, aux. power supply, 4 logic inputs, 5 digital outputs, clock
-A9	RS-485, aux. power supply, 8 logic inputs, 10 digital outputs, clock

가격 확인(원하는 수량을 기입하십시오.)

다른 고객님이 함께 구매하신 제품 : 이 아이콘을 클릭하시면 기존 고객들께서 이 제품을 주문할 때 함께 구매하신 제품리스트가 보입니다.

제품 번호/Desc.

수량

설명

CN2120 Series: Ramp/soak profile controller

CN2120-R1-R2-A4

판매 상담

배송:

Ramp/soak profile controller with 2 relays outputs, RS485, auxiliary power supply, clock

CN2120-R1-R2-F5-F6

판매 상담

배송:

Ramp/soak profile controller with 2 relays and 2 0 to 20mA outputs

CN2120-R1-R2-A8

판매 상담

배송:

Ramp/soak profile controller with two relays, RS485, auxiliary power supply, clock, 4 logic inputs, 5 digital outputs

CN2120-R1-R2-F5-F6-A2

판매 상담

배송:

Ramp/soak profiler with 2 relays, two 0 to 20 mA outputs, RS485, auxiliary power supply

CN2120-R1-R2-F5-F6-LV

판매 상담

배송:

Ramp/soak profile controller with 2 relays, and two 0 to 20 mA outputs, low voltage power

CN2120-T1-T2-A9

판매 상담

배송:

Ramp/soak profile controller, 2 AC ssr's, RS485, auxiliary power supply, 8 logic inputs, 10 digital outputs, clock

CN2120-DC1-DC2-A2

판매 상담

배송:

Ramp/soak profile controller with 2 dc pulse outputs, RS485, auxiliary power supply

CN2120-DC1-DC2-A6

판매 상담

배송:

Ramp/soak profile controller with 2 dc pulse outputs, RS485, auxiliary power supply, clock, 4 logic inputs, 6 digital outputs

CN2120-DC1-DC2-F5-F6

판매 상담

배송:

Ramp/soak profiler with 2 dc pulse outputs and two 0 to 20 mA outputs

CN2121 Series : Ramp/soak profile controller with output failure detection or potentiometer feedback (field selectable)

CN2121-R1-R2-F5-F6-A9

판매 상담

배송:

Ramp/soak profile controller with 2 relays, two 0 to 20mA outputs, RS485, auxiliary power supply, clock, 8 logic inputs, and 10 digital outputs

CN2121-DC1-DC2

판매 상담

배송:

Ramp/soak profile controller with 2 dc pulse outputs

CN2121-DC1-DC2-A4

판매 상담

배송:

Ramp/soak profile controller with 2 dc pulse outputs, RS485, auxiliary power supply, clock

CN2121-DC1-DC2-F5-F6-A2

판매 상담

배송:

Ramp/soak profile controller with 2 dc pulse outputs, two 0 to 20 mA outputs, RS485, and auxiliary power supply

Accessories

CN3200-SOFT-WIN2

1,037,310원

배송: 6 주

Software

CNQUENCHARC

64,640원

배송: 2 주

Noise Suppression RC snubber (2 leads), 110 to 230 Vac

제품 번호로 주문하기

제품 번호

수량

제품 번호

수량

† 모든 가격은 원화로 표시되어 있습니다.

제품 번호 생성기

제품 옵션을 선택하세요

(1)		(2)	(3)	(4)
	-

옵션 선택:

(1) Series 선택하기:
CN2120 : Ramp/soak profile controller
CN2121 : Ramp/soak profile controller with output failure detection or potentiometer feedback (field selectable)

(2) Output 1 and 2 선택하기:
R1-R2 : Relay and relay
T1-T2 : AC SSR and AC SSR
DC1-R2 : DC pulse and relay
DC1-DC2 : DC pulse and DC pulse
R3 : SERVOMOTOR relay and relay

(3) Output 5 and 6 선택하기:
없음(공란으로 비워두기) : None
-F5-F6 : Output 5 (0 to 20 and 4 to 20 mA). Output 6 (0 to 20 and 4 to 20 mA)
-LV : 24 Vac/Vdc power

(4) Additional Option 선택하기:
없음(공란으로 비워두기) : None
-A2 : RS485 auxiliary power supply
-A4 : RS485 auxiliary power supply clock
-A6 : RS485 auxiliary power supply 4 logic inputs 5 digital outputs
-A7 : RS485 auxiliary power supply 8 logic inputs 10 digital outputs
-A8 : RS485 auxiliary power supply 4 logic inputs 5 digital outputs clock
-A9 : RS485 auxiliary power supply 8 logic inputs 10 digital outputs clock

참고: 제품 구성 시 ‘판매 상담’으로 표시되어있는 제품은 영업부와 상담하십시오.