Circulation Heaters for Heat Transfer Oils, Liquid Paraffin, Degreasing Solutions and Light/Medium Weight Oils

CHF3 Series

Circulation Heaters

페이지 하단에서 가격을 확인하세요.

가격 확인

Standard Element Sheath Materials
Incoloy® 800 — A Nickel (30 to 35%), Chromium (19 to 23%), Iron alloy. The high nickel content of this alloy contributes to its resistance to scaling and corrosion. Used in air heating (also see Incoloy® 840) and immersion heating of potable water and other liquids that are not corrosive to an Incoloy® 800 sheath.
Low Carbon Steel — Applications include fluid heat transfer media, tar, high to low viscosity petroleum oils, asphalt, wax, molten salt, and other solutions not corrosive to a steel sheath.
316 Stainless Steel — A Chromium (16 to 18%), Nickel (11 to 14%), Iron Alloy with Molybdenum (2 to 3%) added to improve corrosion resistance in certain environments, especially those that would tend to cause pitting due to the presence of chlorides. Applications include deionized water.
Copper — Mainly used in clean water heating for washrooms, showers, rinse tanks and freeze protection of storage tanks.

순환 히터 - 관련 제품 보기

설명

Surface Treatments for Stainless Steel and Incoloy® Elements and Other Wetted Parts to Improve Corrosion Resistance Flanged immersion heater surfaces in contact with the material being heated can be passivated or electro-polished to improve their resistance to corrosion. Passivation removes surface contamination, usually iron, so that the optimum corrosion resistance of the stainless steel is maintained. Surface contamination would come from the small amount of steel that may be worn off a tool during the manufacturing process. Passivating is accomplished by dipping the heater in a warm solution of nitric acid. Electro-Polishing is an electrochemical process that removes surface imperfections and contaminants, enhancing the corrosion resisting ability of the stainless steels. The resultant surface is clean, smooth and bright. Many medical and food applications require this finish.

Nominal Pipe Size	Dimensional Drawing Number	KW	Model Number					Approx Weight
8 watts/in² (1.3 watts/cm²) — Typical Applications: Fuel Oils (Bunker C and Number 6) Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe Size	Dimensional Drawing Number	KW	120V	240V-1Ph (C*)	240V-3Ph (C*)	480V-1Ph (C*)	480V-3Ph (C*)	lb	kg
2¹⁄₂ NPT 3 elements	2.2	2	—	—	CHF01100(1)	—	CHF01101(1)	37	17
2¹⁄₂ NPT 3 elements	2.3	3	—	—	CHF01102(1)	—	CHF01101(1)	46	21
3"—150 lb 3 elements	3.2	2	—	—	CHF01104(1)	—	CHF01105(1)	62	28
3"—150 lb 3 elements	3.3	3	—	—	CHF01106(1)	—	CHF01107(1)	76	34
(C*) = Number of Branch Circuits per heater

Nominal Pipe Size	Model No.	Dimensional Drawing Number	KW	Approximate Weight
23 watts/in² (3.6 watts/cm²)—Typical Applications: Lightweight Oils, Degreasing Solutions, Heat Transfer Oils
Nominal Pipe Size	480V-3Ph (C*)	Dimensional Drawing Number	KW	lb	kg
10"—150 lb 27 elements	CHF01384(3)	10.3	90	537	244
	CHF01385(3)	10.4	105	580	263
	CHF01386(3)	10.5	120	623	283
12"—150 lb 36 elements	CHF01387(4)	12.4	140	751	341
12"—150 lb 36 elements	CHF01388(4)	12.5	160	793	360
14"—150 lb 45 elements	CHF01389(5)	14.3	150	824	374
	CHF01390(5)	14.4	175	885	401
	CHF01391(5)	14.5	200	941	427
Ordering Example: CHF01386, 120 KW, 480 Vac, 3 phase circulation heater. (C*) = Number of Branch Circuits per heater Note: Nominal pipe size 203 mm (8") and larger are 20 watts/in² (3.1 watts/cm²)

Nominal Pipe Size	Model No.		Dimensional Drawing Number	KW	Approximate Weight
16 watts/in² (2.5 watts/cm²)—Typical Applications: Medium Weight Oils, Heat Transfer Oils, Liquid Paraffin. Note: 3-Phase only. Cannot be rewired for single phase.
Nominal Pipe Size	240V-3Ph (C*)	480V-3Ph (C*)	Dimensional Drawing Number	KW	lb	kg
2¹⁄₂ NPT 3 elements	CHF01392(1)	CHF01393(1)	2.1	2	28	13
	CHF01394(1)	CHF01395(1)	2.1	2.5	29	13
	CHF01396(1)	CHF01397(1)	2.1	3	30	14
	CHF01398(1)	CHF01399(1)	2.2	4	37	17
	CHF01400(1)	CHF01401(1)	2.3	5	45	20
	CHF01402(1)	CHF01403(1)	2.3	6	46	21
3”—150 lb 3 elements	CHF01404(1)	CHF01405(1)	3.1	2	53	24
	CHF01406(1)	CHF01407(1)	3.1	2.5	53	24
	CHF01408(1)	CHF01409(1)	3.2	3	61	28
	CHF01410(1)	CHF01411(1)	3.2	4	62	28
	CHF01412(1)	CHF01413(1)	3.3	5	74	34
	CHF01414(1)	CHF01415(1)	3.3	6	76	34
Ordering Example: CHF01396, 3 KW, 240 Vac, 3 phase circulation heater. (C*) = Number of Branch Circuits per heater

가격 확인(원하는 수량을 기입하십시오.)

제품 번호/Desc.

수량

설명

Nominal Pipe Size; 2 1/2 NPT 3 elements

CHF01392

3,096,910원

배송: 7 주

240V-3Ph, 2 KW, 28 lbs

CHF01403

4,927,830원

배송: 8 주

480V-3Phase, 6 KW, 46 lbs

Nominal Pipe Size; 3 150 lbs Flange 3 elements

CHF01404

판매 상담

배송:

240V-3Ph, 2 KW, 53 lbs

제품 번호로 주문하기

제품 번호

수량

제품 번호

수량

† 모든 가격은 원화로 표시되어 있습니다.
참고: (C*) = Number of Branch Circuits per heater. Note: Nominal pipe size 203 mm (8") and larger are 20 watts/in2 (3.1 watts/cm2)
주문 예: (1) CHF01392 240V-3Ph, 2 KW, 28 lbs Nominal Pipe Size; 2 1/2 NPT 3 elements, 3,096,910원