2-WIRE ISOLATED CONDUCTIVITY TRANSMITTER SYSTEM

CDTX-45

2-Wire Isolated Conductivity Transmitter System

1,309,900원 CDTX-45

가격 확인

PEEK Sensor Body Construction
4-Electrode Sensor Type
Electrode Coating Rejection Diagnostic
Universal Mounting Configurations
Microprocessor Based System
Large Dual Display Format
Loop Powered, Fully Isolated

전도도 측정 장치 - 관련 제품 보기

설명

SENSOR FEATURES
The sensor housings are constructed of PEEK, a high performance thermoplastic that provides outstanding mechanical strength and chemical resistance. Multiple sealing materials are used to preserve sensor integrity over a wide range of applications.

The four electrodes used in the cell are made of titanium for greater chemical resistance. Two of these electrodes are used to establish the sensor drive potential. The other two electrodes sense the flow of current between the drive electrodes and maintain the proper drive potential. The current that flows between the two drive electrodes is directly proportional to solution conductivity. With conventional two-electrode sensors, as the process solution begins to coat the electrode surfaces, the sensor output signal begins to decrease. This produces an artificially low conductivity measurement.

The CDTX-45 four-electrode system uses electrode diagnostics to compensate for the effects of fouling. As the two drive electrodes become coated by the process solution, a feedback mechanism involving the two sensing electrodes detects the decrease in drive potential and automatically re-establishes the proper drive potential. When the degree of coating reaches a limit where compensation is no longer possible, the diagnostic actuates an alarm to signal that the sensor requires cleaning.

The unique drive/control scheme of this system allows a single sensor configuration to be used reliably over a wide conductivity range. This system eliminates the requirement for multiple sensors with varying cell constants that are restricted to narrow operating ranges.

TRANSMITTER FEATURES
The microprocessor-based transmitter is loop-powered and fully isolated for high service reliability. The transmitter includes devices to protect the system from power surge and brownout events.

The large, high contrast, super-twist display provides excellent readability over a wide operating temperature range, even in low light conditions. The main display line consists of large, segmented characters with measurement units. The secondary display line utilizes easily readable dot matrix characters for clear display of calibration and diagnostic messages. Two of four measured parameters may be displayed simultaneously.

Four-button programming provides intuitive navigation through the menu-driven user interface. The 4 to 20 mA transmitter output can be configured to represent any portion of the measurement range. Output HOLD, ALARM and SIMULATION features provide the user with complete control of the system output under any condition.

Diagnostic messages provide a clear description of system condition, which eliminates confusing error codes that must be looked up in the operator’s manual.

The flexible calibration method includes stability monitors that check temperature and main parameter stability before accepting data.

가격 확인(원하는 수량을 기입하십시오.)

다른 고객님이 함께 구매하신 제품 : 이 아이콘을 클릭하시면 기존 고객들께서 이 제품을 주문할 때 함께 구매하신 제품리스트가 보입니다.

제품 번호/Desc.

수량

설명

CDTX-45

1,309,900원

배송: 2 주

Conductivity Transmitter

CDE-45P

938,390원

배송: 2 주

Conductivity Sensor

Accessories

U24Y175

판매 상담

배송:

24 Vdc, 175 mA Power Supply

PHTX-45-SMH

판매 상담

배송:

Submersion Mounting Hardware, 1.8 m (6’)

CDSA-450

26,820원

배송: 2 주

450 µmho/cm conductivity solution, 1 Quart

CDSA-1500

26,820원

배송: 2 주

1500 µmho/cm conductivity solution, 1 Quart

CDSA-4500

26,820원

배송: 2 주

4500 µmho/cm conductivity solution, 1 Quart

† 모든 가격은 원화로 표시되어 있습니다.
참고: Comes complete with operator's manual.

주문 예: (1) CDE-45P Conductivity Sensor, 938,390원 plus (1) CDSA-4500 4500 uS Calibration Solution, 1 QT, 26,820원 plus (1) CDTX-45 Conductivity Transmitter, 1,309,900원 , 938,390 + 26,820 + 1,309,900 = 2,275,110원

제품 메뉴얼:

다운로드 CDTX-45 - Four-Electrode Conductivity Transmitter

다운로드 CDE-45P - Four-Electrode Conductivity Sensor

관련 제품:

CDS Series
상세정보를 위해 클릭하세요 →
Conductivity Calibration Solutions

U24Y101
상세정보를 위해 클릭하세요 →
Unregulated Power Supplies